Data Logging
I would like to data log fuel pressure to a Zeitronix Zt 02 unit as the 5th input user defined source. Can anyone recommend a pressure sensor that will supply the 0-5vdc input signal?
|
I run the autometer fuel pressure sensor into my ZT-2. The 0-5v is 0-100 psi so the percentage you read corresponds to the fuel pressure. It stops reading at 98 psi even if you go over 100
|
Thank you for the quick response. On my way to Autobarn now.
|
I left out a word-- TPS--, I am using the TPS ZT-2 input for fuel 0-100% equals 0-100psi. You can also use the auxilliary input, but that will read the voltage and you will need to convert in your head.
|
All times are GMT -4. The time now is 11:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands