DIY manifold welding question.
08-15-2007, 06:21 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Alexandria, VA
Posts: 125
Total Cats: 0
DIY manifold welding question.
So I need to get a welder. One to weld up a JGS manifold kit would probably be one of my bigger jobs, aside from random brackets, ets. The problem is I live in a condo, and have to work on the cars out of my parent's garage. The garage is only wired for 110v. What welders are you other DIYers using at home?
JGS recomends one that will do 200amps on their site, but that's not feasible. Do I really need one that powerful or will I be able to get by with one that does 90amp if make sure to prep well?
JGS recomends one that will do 200amps on their site, but that's not feasible. Do I really need one that powerful or will I be able to get by with one that does 90amp if make sure to prep well?
Reply
0
0
08-15-2007, 06:25 PM
#2
First off. Fluxcore 
no gas, cheaper to use, and you can use it outside without a windshield, and its hotter (better weld)
I like clarke because of the warranty and price (its what i have)
I have welded with lincoln and millers, and well i like the clark fluxcore the best. (the lincoln and miller were both mig)
Harbor Freight becasue its cheap, but I would only get the 240 volt of that version
no gas, cheaper to use, and you can use it outside without a windshield, and its hotter (better weld)I like clarke because of the warranty and price (its what i have)
I have welded with lincoln and millers, and well i like the clark fluxcore the best. (the lincoln and miller were both mig)
Harbor Freight becasue its cheap, but I would only get the 240 volt of that version
Reply
0
0
08-15-2007, 07:32 PM
#3
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Alexandria, VA
Posts: 125
Total Cats: 0
yeah, 240v isn't an option. I told dad I'd pay to have an electrician come do it, but i get a very stern 'no' lol. So I can either survive with a 110v for now, or wait until the new job pans out, and I can sell the condo and upgrade to garage with an attached house. but that'll happen when???
I was thinking if 90amp/110v version wouldn't cut the mustard, maybe mock it up and tack it and have someone else finish it for me. But then that'll add to the cost.
I was thinking if 90amp/110v version wouldn't cut the mustard, maybe mock it up and tack it and have someone else finish it for me. But then that'll add to the cost.
Reply
0
0
08-15-2007, 07:54 PM
#5
240V excentsion are expensive, make it yourself.
You can do it with a 110. I did mine (1/2 mild steel flange with schedule 40 weld els) and its fine.
if you have an electric dryer that for sure it.
Actually everything Ive made has been with 110v including an offroad car (still works beautifully)
You can do it with a 110. I did mine (1/2 mild steel flange with schedule 40 weld els) and its fine.
if you have an electric dryer that for sure it.
Actually everything Ive made has been with 110v including an offroad car (still works beautifully)
Reply
0
0
08-17-2007, 09:35 AM
#11
A 240V extension 'cord' is relatively cheap to make. Get the cord cap/outlet from HD. Use 12 gauge Romex. I've been running a 75' extension cord for years on some moderately high amperage equipment.
When purchasing a welder, buy the highest power one that you can afford.
This is possibly the best welding accessory that you can buy:
http://www.weldingvideos.com/gmaw.html
When purchasing a welder, buy the highest power one that you can afford.
This is possibly the best welding accessory that you can buy:
http://www.weldingvideos.com/gmaw.html
Reply
0
0
08-17-2007, 09:47 AM
#13
i know a little about a lot of things. i also have a professional fabricator in my crew. The only time he migs something is to tack it in place before he tigs it.. 
he would probably use a acetylene torch and a coat hanger to weld things together before he'd break out a flux core welder..
he would probably use a acetylene torch and a coat hanger to weld things together before he'd break out a flux core welder..
Reply
0
0
08-17-2007, 10:02 AM
#14
TIG looks great, but overkill in most instances. If you can afford to do every little thing in TIG, well then why not. For the small-scale stuff we do (face it, all of our stuff is small-scale) it isn't a make-or-break cost difference, so custom shops love to do it for the snobby factor. But in large-scale projects (think industrial construction) MIG is still used as the "better weld," where submerged gas arc welding is still being used in the routine stuff, and is perfectly fine.
Reply
0
0
08-17-2007, 10:42 AM
#15
My downpipe is sched 40 pipe, two sections and flanges welded with a ~100amp 110v cheapie Mig. Still together with over 1k miles of which there were numerous heat cycles from boosting with every drive. I think the cheap flux core is adequate for most DIYers and will pay for itself with just a few projects. The biggest caution - know your duty cycle. Cheap welders have low duty cycles and the quickest way to kill one is to ignore it.
Reply
0
0
09-04-2007, 10:42 PM
#19
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Alexandria, VA
Posts: 125
Total Cats: 0
lol.. So i was getting back to this thread, and did a quick google search on the adding a bigger fan. here's one of the top links I came up with: http://www.hotrodders.com/forum/home...der-96259.html How's that for DIY?...
Reply
0
0
