Do it the right way
 

https://cimg8.ibsrv.net/gimg/www.mia...c98b14777.jpeg
Took some jip on here a year ago for trying to do a cheap build wanted to say thanks to the people who took the piss I did it right and I love it.

Dave,

Where are you located? I noticed the brake parts were on the wrong side of the car.

Please tell us what you have done.

Very clean!

Please tell me that you have a one-way check valve between the intake manifold and the brake booster cylinder - from the photo it looks like a simple hose connects the two.

cant get everything right lol

was on order took this picture just while I was waiting for parts

yeah I’m in the UK

so I was going to piggy back with Chinese crap


its a GT28
kraken manifold with matching downpipe

me221 ECU

did my water pump and timing belt found a wrecked woodruff key hat to do a wed repair on that.

basically cleaned painted what I could has a wide band fitted loads of other little things.

Just ordered a engine going to do the internals and what not can’t wait for that.

Good catch! I am just starting to do a turbo build; have one in the PVC line, but did not think about the brake booster. Many thanks!

turbo changes this car it’s unreal now

There is one from the factory in the stock line. Don't worry about it unless you've replaced the lines.

Are you on the 3 or 2.5 inch downpipe?
I'm making a part list for my turbo build and Kraken is on it. My only problem is with the downpipe diameter.
Forum wisdom tells me to go 3, but Kraken only offers 2.5?

Would this be a limiting factor on the 1.6? I don't plan to build the motor.

Kraken offers a 3" for the T25 turbos. Message him and ask him. My 1.8 T25 manifold, 3" downpipe and 3" downpipe back exhaust just came last Thursday and looks very very good, especially for the money!