Ebay TurboKit Identification Challenge!
I tried the search button, but I honestly didn't know what to put in for keywords.
take a look at: http://cgi.ebay.com/ebaymotors/94-97...spagenameZWDVW Looks like chinese copy of BEGi manifold, ya? chrome shit everywhere, but cheap. Whats the story here? |
i think its total crap but if you want to be a guinea pig... i am guinea pig for turbo specialties. i would love to try that one as well but im short on $$. went $3k over my car budget already :)
|
i searched for the vendor "ilovetacotaco" and found the thread with people complaining about this thing. im not interested in super cheap manufacturing, but I did happen to like the aluminum intercooler pipes. few extra degrees of thermal radiation other than the intercooler itself...
|
I don't believe those intercooler pipes are anything but the "universal" kits readily available on ebay configured to resemble how you would have to do it on a Miata. They would need work to be made to fit, I believe.
|
There's no way those pipes could go in like that. Too much room on the cold side of the intercooler to make sense, and I don't think you can actually run the hot side like that. The turbo looks low enough to hit the motor mounts let alone the other pipes.
|
Looks like it would save lots of weight by eliminating that pesky engine block.:)
|
look at the coupler over the 3-bolt adapter on the turbo.
but as installed the intercooler pipes would have to travel through metal. clock the turob and you could easily make it work, then the question arises " do i want to?" |
yeah with a "kit" like that you shouldn't have to clock the turbo when you get it, it should just fit.
|
haha silicone coupler over 3-bolt flange. nice.
also didn't the "turbo not hit block" picture once have a block in it? of course it wont hit the block.... the block's in the garage or something. |
Originally Posted by Tesseracter
(Post 150871)
I tried the search button, but I honestly didn't know what to put in for keywords.
take a look at: http://cgi.ebay.com/ebaymotors/94-97...spagenameZWDVW Looks like chinese copy of BEGi manifold, ya? chrome shit everywhere, but cheap. Whats the story here? Mark |
We have got to do something about these posts... Scott, how about adding a post in the FAQ with a small blurb on the 4 or 5 common eBay kits.
|
Originally Posted by samnavy
(Post 150911)
We have got to do something about these posts... Scott, how about adding a post in the FAQ with a small blurb on the 4 or 5 common eBay kits.
Sorry for making you click my silly little thread. |
Originally Posted by Markp
(Post 150898)
Why do you think it's a copy of that manifold?
Mark http://www.bellengineering.net/Image...Miata_S4_3.JPG |
All times are GMT -4. The time now is 06:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands