RicanmiataRacer

Hey Guys I just need some ideas On what kind of extra bend I'll need for my Ic with the ac and ps


So far I have one straight 90' degree bend and two u bends going 2" all the way,dp 2.5 , should I remove the bumper and big dust shield to make things easier ,around the rad or under the rad , Could I use like 2" rad hose till I get the rest Of my silicone couplers to help piece **** togther(I know it sounds stupid) Im really getting down to business guys and I need your help and oppinions rican Is going boosted by the end of this month

RicanmiataRacer

? nobody cares I guess

cjernigan

iTrader: (13)

Everyone is in bed, monday mornings suck with no sleep.

The radiator hose should work fine for the time being while you mock up your IC pipes that way you don't buy unnecesary expensive couplers.
Taking the bumper off might make some things easier but it isn't that important.
The ubends will come off the intercooler on each side and you will definitely need more bends than that one extra 90* unless you're doing something I've never seen before or plan on using 90* silicone couplers instead.

Braineack

iTrader: (62)

no, becuase we've pointed you in the right direction at least 17 times. Two posts with the exact bends and cost each....Tons of stories and images of families getting run over later, and you still haven't finished.

y8s

iTrader: (8)

your mom cares, rican

seriously though... check out my post and you can see what you might need. add another U or 2 for the remaining pipe.

Newbsauce

iTrader: (2)

Screw the bends.. just remove AC/PS and call it a day.

Markp

Just buy exhaust flex pipes and bend it anyway that you want... Sure it won't be the best for airflow but you won't have to think too hard anymore.

Mark

RicanmiataRacer

Dude flex exhaust Is not air tight, there would be leaks all over the damn place, .......got some more bends today, when I get home I can try to see how things sit togther........Im in trouble though...nobody in this area wants to work with the exhaust flange I have 2" with a 1 1/2" hole type exhaust flange.....As far as ic piping goes IM DONE! My dilema now is finding somone to get a 2.5 down pipe made and with that I have another issue I cant make a 2.5 down pipe when the largest hole On the flange is 2"

Markp

You are thinking of the wrong flex pipe. The stuff I am talking about is air tight. As far as the downpipe, just get a 2"-2.5" transition and be done with it too.


Mark

RicanmiataRacer

mark p , Your not talking about those long pieces of flexible exhaust piping the sell at advance discount auto , I've been told that it leaks air like a bitch


this is what I was referring to when you mentioned it mark