Evo VI exhaust on 99ae
 

https://www.miataturbo.net/attachmen...ine=1328984200

I managed to fit an exhaust for an evo VI to my 99ae
Several cuts and welds but not as bad as I was expecting.
I am curious how it will sound :D

It exits underneath car, doesn't go all the way to the back?

is that a piece of styrofoam crammed between the exhaust and transmission?

I wanna know how it sounds too.

I did that with mine because I cut off a rusty tip. It now ends right inside the bumper skin, which I blame for some extra drone I have now. Might wanna try a turn down tip or something else.

Otherwise, looks fairly good. Did you have a deal on this one? Is that why you used it?

I will add about a foot of piping to the end of the back box to clear the bumper. (There is suitable bitl left over.) My aim It should look like stock exit but with a larger diameter

If it ends up being too loud I could put a baffle in the back box but hopefully the 2 resonator sections will deaden the sound and reduce rasp.

yes, it was a good deal, 50$ on ebay. Here in Slovakia it is difficult to come by Miata parts.

https://www.miataturbo.net/attachmen...ine=1329247048

I attached a piece to clear the bumper. (The section is removable so a baffle could be added if needed.)

http://youtu.be/JfoCtrC7ICQ

I guess it is not too loud for a straight through set up.

Sounds great! How is it on the freeway?

With the left over bits I made an ear bleeding back muffler.
https://www.miataturbo.net/attachmen...ine=1333197181
https://www.miataturbo.net/attachmen...ine=1333197181

https://www.miataturbo.net/attachmen...ine=1333197786
Almost ready to start messing up another perfectly good MX5;)

that sounds awsome. Now you have me thinking.

Now lets hear the bleedy one

In a few days we will try the bleedy one on a n/a 1.6. I imagine it will sound like a raspy fart can:drool: I will post the sound clip!

Put a turbo on it and it will sound fine.

For a second I thought your ramps were headers.

me too!