Final details help with oil and water lines and DP
 

OK now that I have my mani difficulties straightened out I think all I have left is to figure out what I need for oil and water lines and the downpipe.

It's a T3 off a saab thats all I know. I've attached pics. Do I need anything different than the recommendations in Brains FAQ?

I see all sorts of dump pipes for T25's and Mitsu turbos are there any for T3's? I think I would have an easier time getting a DP fabbed if I had one of those for them to start with then having them start with just a flange. Can anyone point me towards anything?

ATP 1/8" oil feed restrictor
1/8" to -4an fitting
m10 x 1.5 to -4an fitting
36" of -4an line (90° on one side)
(1) t3 oil drain flange w/ gasket
(2) 1/2" to 5/8" slip on fittings (consider (1) 45° 1/2" fitting as the lower radiator hose will be right in your way)
24" of 5/8" silicone drain line

Budget $90-110

http://www.rev2red.com/images/cars/turborebuild009.jpg

Take a look at some of threads in my sig. I can probaby get you most of what you need next week.