Intercooler radiator hose fail
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2009
Location: 94401
Posts: 240
Total Cats: -2
Intercooler radiator hose fail
OK I have 95 and im putting together my diy inter-cooler set up and diy reroute. The only problem im running into is that there is a idle control valve located right under the throttle body and when I run a 90 degree intercooler pipe straight down front the tb it hits the fitting for the idle control valve hose. If I turn the hose slightly to the right (pass side) it will run into my coolant reroute. Is there anyway of running without a idle control valve? I have mspnp also if you guys have any pics of how yours is set up that will be great I will post pics of my problem as soon as I get home tonight, If for any reason no one answers back to this untill then.
#2
Senior Member
iTrader: (10)
Join Date: Aug 2007
Location: Fredericton, NB
Posts: 1,186
Total Cats: 4
post some pictures...chances are, you'll need to do something with your re-route...
there was just a thread posted with this problem...check here
https://www.miataturbo.net/showthrea...light=re-route
there was just a thread posted with this problem...check here
https://www.miataturbo.net/showthrea...light=re-route
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM