Flexible radiator hoses
Does anyone know of a good product or good way to make custom radiator hoses. I need to do some tricky bends and am not sure what to use. I am thinking of going to the junkyard and just buying a bunch of random ones and piecing it all together with clamps?? Any better ideas?
|
Originally Posted by kylelind
(Post 150841)
Does anyone know of a good product or good way to make custom radiator hoses. I need to do some tricky bends and am not sure what to use. I am thinking of going to the junkyard and just buying a bunch of random ones and piecing it all together with clamps?? Any better ideas?
|
That's what a few people on the forum use. It works good when you're routing IC piping.
|
What length are people running on the flex radiator hoses?
|
Expensive but its an awesome product:
http://www.siliconhoses.com/content....022M&cat=0022M |
I ended up buying some at Kragen's. They have a pretty good selection and were only $9.99 and 16.99.
|
Originally Posted by PAT!
(Post 151279)
Expensive but its an awesome product:
http://www.siliconhoses.com/content....022M&cat=0022M |
<$20 at napa, for cheap universal solution.
1 1/4" x 20" part number is in my "i blew my engine" thread. |
Originally Posted by spike
(Post 151440)
Those hoses look really nice,I will consider those when the time comes for new hoses.
I'm trying to get Pegasus Auto Racing to start carrying it (we are their silicon supplier), in the hopes to increase the size of our production runs so as to bring the production costs down... |
Use a hanger, get the shape go to napa or some supplier and find a piece that will work.
|
Non-silicone (aka black radiator hose with flex) version at pep boys is ~$10 in varying lengths from 11" and up.
|
Originally Posted by PAT!
(Post 151825)
Stuff is amazing, you can actually tie it into a knot and it doesn't collapse.
I'm trying to get Pegasus Auto Racing to start carrying it (we are their silicon supplier), in the hopes to increase the size of our production runs so as to bring the production costs down... |
Originally Posted by PAT!
(Post 151825)
Stuff is amazing, you can actually tie it into a knot and it doesn't collapse.
I'm trying to get Pegasus Auto Racing to start carrying it (we are their silicon supplier), in the hopes to increase the size of our production runs so as to bring the production costs down... Do they have a size that will replace the heater hoses? |
We make:
16, 19, 25, 28, 30, 32, 35 and 38mm I.D. only... not sure of the size of the heater hoses. |
Originally Posted by Braineack
(Post 151600)
<$20 at napa, for cheap universal solution.
1 1/4" x 20" part number is in my "i blew my engine" thread. |
Gates Vulco-Flex hose - made in the USA !
Used it for my coolant re-route, works really well. |
All times are GMT -4. The time now is 07:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands