Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   DIY Turbo Discussion (https://www.miataturbo.net/diy-turbo-discussion-14/)
-   -   FMU, Suggestion. (https://www.miataturbo.net/diy-turbo-discussion-14/fmu-suggestion-18433/)

RemoteMX5 03-17-2008 09:18 PM

FMU, Suggestion.
 
Hello friends.

So I finally put my turbo kit together and it's on the car right now my setup is as follows.

2005 Mazda Miata.

T25
0.42 A/R Cold Side
Trim: 40
0.86 A/R Hot Side
8PSI Internal gate

Eghay Bottom mount mani
Custom DP

Eghay IC
Custom Piping
---

My question right now is, Im thinking of running a FMU of some sort. Just looking for suggestions any one might have for that set up. Keep in mind I still have stock injectors.

Thanks,
Mike

Mach929 03-17-2008 09:35 PM

i don't think there's a better option than begi

Joe Perez 03-17-2008 09:40 PM

Running an FMU on an '05 will also require an external inline fuel pump. Figure $450 for the lot. http://bellengineering.net/Pages/pro...uelsystem.html

RemoteMX5 03-17-2008 10:46 PM


Originally Posted by Joe Perez (Post 229343)
Running an FMU on an '05 will also require an external inline fuel pump. Figure $450 for the lot. http://bellengineering.net/Pages/pro...uelsystem.html

Two questions, I never ran an FMU, I always either ran a rom tune on my KA-T, or Power FC on my RB. Im not really new to the tuning world. But here are my questions.

Why an Inline pump, and why use the over price BEGi unit when I can use my external MSD unit that I used on my 240 when I ran Ethanol.

Jefe 03-17-2008 11:00 PM

Sounds like you might be a good candidate for the PC-Pro, or even the original JRPC.

RemoteMX5 03-18-2008 10:00 AM


Originally Posted by Jefe (Post 229383)
Sounds like you might be a good candidate for the PC-Pro, or even the original JRPC.

So what is this PC Pro Bandaid? Hehe

Zabac 03-18-2008 10:10 AM

a joke, now say "ohhh, haha", lol

cant speak from experience, but everything BEGi sells is great quality and reliability
but i would still get a MS and bigger injectors if i was you...

now, post pic of your bottom mount eghay mani or BAN!!!


shameless question: does eghay really just stand for ebay? thats what google thinks

mazda/nissan 03-18-2008 10:20 AM


Originally Posted by whaaamx5 (Post 229534)
shameless question: does eghay really just stand for ebay? thats what google thinks

did you really need google to tell you that?

RemoteMX5 03-18-2008 10:57 AM

Yeah I can't speak from experience too about BEGi but I never heard anything bad about them. All I'm saying is that it's a bit over priced :)..

Im just looking for a way to tune it now that won't put a hole in my pocket just yet :)...

Either way I should have pics this weekend, or early next week.

Oh and does anyone have an Idea where I can find intake elbows for a T25, I cant complete my IC piping with out those suckers heh.

RemoteMX5 03-18-2008 06:57 PM

Ok differ question.

If I was going to build my self a parallel MS, how much different would the wiring from a 00NB be?

Since I don't see a complete write up for a 05 yet heh.


All times are GMT -4. The time now is 06:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands