Getting a downpipe
I am getting close to buying all the stuff for my turbo setup. One thing i dont know about is the downpipe. Should i just buy the flange and have a local exhaust shop make one or is there somewhere you can buy one?
Thanks in advance! |
depends on manifold you use. easiest would be to make a custom one. crush bent should be around $100 from your local muffler shop and you know its gonna fit :)
|
thats what i was thinking, the problem is getting the car there with the turbo on it so they can make the downpipe
|
What kind of turbo?? Crushbent is going to hurt your flow before it has started flowing isnt it??
|
gt28 most likely
|
If you use an off the shelf manifold, there will most likely be a good dp out there from somewhere. What mani?
|
First of all, we need to know what manifold you will be using. If you don't plan on making one yourself, I recommend dropping your car off at a local muffler or fab shop. You do not want to drive too far without a downpipe. If you happen to be running a 1.8 hks manifold and can wait, I may have an option for you in a few months:cool:
Also, try to stay away from crushed bent piping. You may regret this choice down the road when you try to maximize your hp potential. |
All times are GMT -4. The time now is 09:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands