Going turbo for the first time...help a NEWB out.
So my current setup is a JRSC with TDR IC on a '97M Edition. Im pretty much maxed out on what the JRSC can give so I've decided to go turbo. I've decided to keep the TDR IC and go with a BEGI kit with Megasquirt as a piggyback for fuel and timing keeping stock ECU to take care of all the other stuff.
So now Im trying to decide on which BEGI kit I should get. I want roughly 220-230whp with maybe maybe maybe the possibility of more power if funding permits me to build the motor(but not planning on going higher anytime soon). I know I want the T2560 due to having the ability to make more power if I want to later. Should I go S kit with the T2560 or go S3??? Obviously if I go S3 I wouldnt need the intercooler or fuel management. Im not really sure what is the difference between the base S kits and the S1,2, or 3 kits besides the DP, intercoolers, and air scoops. Is there really any other significant differences? Maybe I should just go S kit with the better DP? |
i wouldn't bother with a kit.
order a manifold, dp, turbo, intake, heat shield shields, oil line kit, water by-pass kit. have them rotate the turbo for the -S kit. |
what she said...lol
you dont need to limit yourself to a kit, call begi up and consult with them about what else you still need and they will work with you, good peeps |
You could also trade it for my car:
https://www.miataturbo.net/forum/sho...215#post209215 |
All times are GMT -4. The time now is 05:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands