Greddy td04 oil adapter plate??
Hey guys, I'm trying to run a stainless steel oil return line with AN fittings. I'm having a hard time trying to source the correct oil return adapter plate. Any ideas where i can find one? Thanks.
|
atpturbo.com
Any of the GT-series fittings should work. That's what I'm using anyway. |
Originally Posted by kotomile
(Post 378599)
atpturbo.com
Any of the GT-series fittings should work. That's what I'm using anyway. |
One more thing, what size AN am I suppose to buy and what size line? I'm using the Begi -8 x 3/8 NPT to tap into my oil pan. I'm just confused because most of fittings I see are -10 or -6.
|
you're tapping the pan to 3/8 NPT? Just get another adapter from summitracing.com for -10 or -6. Or go there and get a -8 for a couple bucks and then spend ~$15 each for some -8 fittings (non-crimp, make sure to get the ones that swivel.) Do yourself a favor and avoid the stainless steel line though, its a pain to deal with and doesn't help you at all for this application. Insulate it somehow afterwords, but the rubber stuff is much easier to deal with
|
Thanks.
|
All times are GMT -4. The time now is 07:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands