LownSlow616

I think the gusset is a great idea. However, I cant TIG worth a ****. And that might void my warranty. IF it ever cracks, gleasemanufacturing will fix it. And he would probably add a gusset as well.
As far as im concerned, this is a gleaseman manifold. Fab9 provided the worst customer service that I have ever received.

LownSlow616

turbo on and clocked

aerocatch latches and GV lip installed


wrapped screamer pipe and dp. this is the completed engine bay


dyno sheet coming next week

LownSlow616

This is how the hood looks from the outside. Screamer pipe isnt too noticeable...until WOT

18psi

iTrader: (76)

I like it

LownSlow616

thanks! It will be hitting a dyno (mustang) next week. Hopefully the operator knows what hes doing. Im at 13psi and FMs base ignition map. Any idea what it will make?

18psi

iTrader: (76)

built engine? pump gas?

LownSlow616

Stock 43k mile 1999 engine. 93 octane

18psi

iTrader: (76)

220-250

Girz0r

iTrader: (1)

Props awarded , this is coming along nicely

yossi126

iTrader: (6)

Great job Reed!
Looking forward to dyno.

LownSlow616

even on a mustang dyno and this wimpy ignition table?

18psi

iTrader: (76)

with that table on a mustang, probably more like 170-190

LownSlow616

I know I can use waaay more timing. I just don't know where to increase it and where to not. And jeremy at FM is on vacation. Should I just add say 4 degrees in every cell above 100kpa?

18psi

iTrader: (76)

Depends, how soon do you want to vent the block?

LownSlow616

Not yet. Mid November wouldn't bum me out that much though. Maybe ill ask jeremy for a more aggressive spark map and ill see if the hydra detects any knock. For the amount of money i have into this, I am going to feel really silly if i dont see over 200 on a mustang dyno

afm

iTrader: (3)

I take it you don't live in CA

How much does the pipe tip move at WOT in a low gear?

LownSlow616

I live in west MI. 93 octane

not much. the engine mounts are stock too. It moves the most on start up. the hole is 2 1/8" and the pipe is 1.5" so it has plenty of room

18psi

iTrader: (76)

there's a joke in there somewhere

huesmann

iTrader: (1)

Needs one of these!

borka

iTrader: (1)

I predict about 220HP at 13PSI on this timing map. my setup made 211HP 201TQ on a very similar timing map at 11-12PSI.

a little off topic. I love how uncluttered your engine bay is, how did you get rid of all the clutter on the left hand side of the engine, there are a million vacum hoses and sensors there on my 99 and nothing on yours?