gt28rs 1.6L plans and start :)
#23
Miotta FTW!
Thread Starter
iTrader: (24)
Join Date: Jun 2006
Location: Chicagoland, IL
Posts: 4,290
Total Cats: 31
My friend might have some. I know he didn't crush the pipe to take full advantage of the ovaled shape captured within the head flange port match. Should make 0 issues though, no blocking, just little more open past the flange then an exact head port match ( i prefer that really as it helps possibly a hair with scavenging).
It was made as a friend of a friend to help me out and such.
It was made as a friend of a friend to help me out and such.
#30
Miotta FTW!
Thread Starter
iTrader: (24)
Join Date: Jun 2006
Location: Chicagoland, IL
Posts: 4,290
Total Cats: 31
Fitment was great. Its an older piece and still in fine condition. I had one of their bars in my civic and its fitment was also spot on.
Its a 4point that we might extend into an 8 point (shock towers rear and nascarish doorbars)
Its a 4point that we might extend into an 8 point (shock towers rear and nascarish doorbars)
#35
Miotta FTW!
Thread Starter
iTrader: (24)
Join Date: Jun 2006
Location: Chicagoland, IL
Posts: 4,290
Total Cats: 31
Having some MS buildup issues... I'll figure them out, just sucks
On a side note... anyone have a radiator out they can measure for me? I want to purchase a radiator to customize... and miata isn't in front of me this week to measure up the rad.
Height/width/depth and location of inlet/outlets.
Gratzie.
On a side note... anyone have a radiator out they can measure for me? I want to purchase a radiator to customize... and miata isn't in front of me this week to measure up the rad.
Height/width/depth and location of inlet/outlets.
Gratzie.
#38
Miotta FTW!
Thread Starter
iTrader: (24)
Join Date: Jun 2006
Location: Chicagoland, IL
Posts: 4,290
Total Cats: 31
not stopping... sigh
Heres visual update from my last day of work.
Like my ex-D1 car doors? Went with less damaged doors, manual and no mirrors. Anyone want power mirrors and windows?
Overall.
Closer
Really Close! Clearance is great with frame/etc... 3in DP without issue.
Little visual idea of IC location, it'll be farther forward and lower. IM will have stock TB flange cut off and new one for a Nissan TB added... giving more angle and larger TB.
Brakes are off, getting 1.8 brake rotors cut for install.
Headlights are gone, never going back...
Cutting of IM/Rad mount etc... begins next time... if i have time...
Heres visual update from my last day of work.
Like my ex-D1 car doors? Went with less damaged doors, manual and no mirrors. Anyone want power mirrors and windows?
Overall.
Closer
Really Close! Clearance is great with frame/etc... 3in DP without issue.
Little visual idea of IC location, it'll be farther forward and lower. IM will have stock TB flange cut off and new one for a Nissan TB added... giving more angle and larger TB.
Brakes are off, getting 1.8 brake rotors cut for install.
Headlights are gone, never going back...
Cutting of IM/Rad mount etc... begins next time... if i have time...