Help with bov install
 

Any good suggestions for a loud bov?

also i've been looking for pictures on how to install it but can't seem to find one.

lastly would i need any special flange or adapter that i would have to buy before installing the bov

Thank you . :noob:

Sub $50 eBay bovs can be nice and loud. Mine is at least, depends on the design. Mines a knock off of a unit that's really loud, so there ya go. For install, you just need to figure out where you want it and weld in a flange or pipe, depending on if its a bolt on or clamp on design. Although I'm a fan of the T shaped bov coupler from siliconeintakes.coo

is this going into your msm that still uses the stock ecu and maf?

are you really this stupid that you haven't learned anything from your last idiotic thread?

Seriously, are you really that dumb and lazy?

where do you have your t shape bov positioned ? any problems with that set up ? would you be able to help me out with the install

yep stock ecu and maf, any problems with that? plus im throwing in a 3 inch custom exhaust after the turbo

Why, are you close or something? Put your location in your profile.

Mine's clamped right off the cold side of the intercooler, no idea if that's the best. They say right off the throttle body is the "best" location, but right off the intercooler was the only straight coupler I ended up using.

the problem is that you're an idiot.

I sincerely hope you do run a cutout venting onto your nuts so you don't procreate.

Have you seen "Idiocracy"? You ARE IT

Dear lord no.

OP don't listen to the haters. Get the biggest loudest BOV you can buy. Don't worry about your idle, your car is mean, it doesn't idle anymore because idling is for pussies and you live your life at WOT.

I like how OP thinks a stock MSM needs help in running as shitty as possible.


Anyways, i vote for the GFB BOV that FM used to ship in their "Big Enchilada" kits. I have mine set on full recirculate, and it's still obscenely loud. It's awful.

This isn't a 1000whp Supra for fuck's sake, it's a fucking sub-200whp (245whp on FM's dyno!) Miata. I'm ashamed to drive this thing because of the noise.

good idea, but you should try the 3 inch exhaust before the turbo

this would be ideal for his setup

https://www.miataturbo.net/attachmen...ine=1361314821

Wouldn't the best position be on the cold side of the intercooler? That way the extra boost doesn't have to travel through the intercooler

That's what I said.

i like the way thenuge26 thinks lol

curly would you happen to have some pictures of your setup?
also what did you do with the stock bov

thanks for your help.

he doesn't have an MSM, so no stock BOV. he has an sr20 t25 with a sidemount manifold

You idiot, if you put a BOV on your MSM with the stock ECU and the MAF it won't idle.

I am a sarcastic fuck, but I'm not joking.

he is a waste of air

You can run dual BOV's if you want moar street kred. Use an electronic bypass valve to stage them at intervals so you get two BLOWS FOR THE PRICE OF ONE

Making dimes squirt them rugs wit dat dual chingy sound

but the stock bov is plastic and garbage and tends to leak, wouldn't it be better to just change it to fix the problem plus get some extra noise out of it

Your MSM does not have a stock BOV.

Is it leaking on your car at all the massive boost levels your stock ecu can handle without shitting itself?

No?

Leave it the fuck alone.

Replace with a BYPASS valve if necessary. I hear Forge makes a good one.


Don't be stupid.

If your stock valve is leaking, let me know. I'll send you a working stock one in good condition for the price of shipping just so i don't have to look at your posts anymore.

Seriously. Out of the goodness of my heart. $6 shipped CONUS. This deal ONLY applies to you.

Thank you. His posts/threads make me want to liquify humanity

well that does it! whats the loudest bypass valve you can get!!!

concealer404 is that the forge bypass valve your selling?

yes. he'll sell you a forge for $6

:facepalm:

What the fuck is wrong with you?

We seriously have banned NUMEROUS other people for being insanely stupid, and they weren't even 50% as bad as this guy.

oh he's close. im just too french to do it right now.


acutally if I was really french I wouldn't ban anyone, I'd make it illegal to ban people.

oh you still so mad:laugh:

Daniel's account is saved because Brain is too busy retreating.

Vous frère toujours en colère?

+1 to Brain for the retardation infraction... sadly cant vote up or down on the actual infraction.

you guys are to funny

Don't forget your stickers. I'm sure they will make your bov louder.

Try reading some of the posts you comment to.

after reading all this ill post more carefully:P

Daniel,

For your goals, I highly recommend something like this...something that will save you $ and bring you all dem hoes:



I even found you the best source to get these from right now:

The Genuine Turbo Sound 97534 Muffler Exhaust Pipe Whistler Whistle | eBay

Just make sure to bondo all of your leaks shut first....

To make things even louder, make sure you re-arrange your setup like this:

https://www.miataturbo.net/attachmen...ine=1361510438

I'm just going to leave this right here:

-_- glad you took my advice on m-s.com to heart...