help identifying turbo fitting
 

I have a e motor garette style turbo gt2860 that i ordered from cincy performance and they dont know the size of the oil inlet port. Size meaning the thead pitch. here is a link to the site that i bought it from E-Motor Garret Style GT28 COM .60 TO4B 63 TRIM, .86 EXHAUST WATER/OIL
I called step at begi and she isnt sure either what size that is. Im trying to get the kit from them but i dont know what size it is. can any one shed some light on this

its a chinacharger and it's 7/16-24 inverted flare i bet. that or 1/8"

thank you. i will try thoes sizes with some bolts and see if begi has something for me!

I don't know. Some of those knock offs use 1/2-20 fittings.
Stephanie

1/8 is too small. and 7/16 im not too sure about. i tried the coarse thread of 7/16 it doesnt thread well and stops suddenly . The place i went to didnt have the fine thread.

found the right thread pitch its m12 fine thread. so far the turbo build is going preety good. Ill have to get this thing running soon so i can give feed back on these knock offs.