If you have a T3/TO4E, I am looking for your DLL data.
 

Hello, I am looking to compare .map files from people who have a similar setup to mine.
1.6L
LINK ECU
750cc inj
T3/TO4E .63ar Hotside

Im looking to compare mostly your WG setup, for 12psi or 15psi.

Anybody outthere?

Thanks!

miatex

Are we talking EBC settings?

I have the same turbo, but my car is a 1.8L and it doesn't run yet. lol

Interested in finding out what RPM you're at when 12psi comes in though...

m2cupcar that's exactly what I am looking for!

Thanks!

miatex

I'm running a similar turbo (specs in sig) and a 2.0L. Numbers below gave good boost response with <1psi variation after target.

WG SNS 95
WG BASE 70 (this is the actuator rating minus atmos)
WG RPM 41
WGLG UP 25
WGLG DN 25
WGSP O 4
WGSP D 7
BOOST T 212
BOOST HYST 15
RATE OF RISE 40

Thanks m2cupcar, the SNS number is rather high, mine is able to hit the boost target at around 54 and going above that creates overshoot... what's your boost target 15psi or more like 18psi?

My WG BASE is 35 would this affect the SNS?
Mi WGLG UP and DN are set to 14, I will rise those to feel the effects.

Thanks for sharing and any additional input would be greatly appreciated!

miatex

Looks like decent numbers. Will check these out for my install