|
Intercooler pipe routing
Could anybody please post pics of how you routed your IC piping? I need ideas.
Thanks |
Keep in mind, just because I posted a lot of over the top setups, doesn't mean I condone it.
|
How about some shots of the hoods? Assuming they have been modified to run "over the top".
|
I was hoping to run into a picture of one of my setups in that assortment. :cry:
One of the "universal" pipe kits with a handful of couplers/clamps and a hacksaw can get you hooked up in no time. Just depends on what your looking to do, but the most common is the FMIC setup. Depending on PS and AC, you will have more/less space to work with. Otherwise, just clock the turbo how you want it to start off and follow the imaginary --------. |
didnt have to mod my hood for over the radiator, and i think most do not end up having to. you just lower and push the radiator back some to give clearance
|
Edit: Who's is this? Interested in what he did with the ac canister. https://www.miataturbo.net/attachmen...ine=1321557085 |
6 Attachment(s)
The shot from above is from a Mazdaspeed, the other two are my car. My routing for the intercooler inlet side will be similar (going through the hole behind driver's headlight) but my tubing will all remain on the fender side of the PS reservoir due to the outlet location of my rotrex.
|
You can bend the AC canister out of the way. I followed the trackdogracing instructions pretty much for my diy setup
|
Setting up my turbo kit now. Running water injection...maintain ps/ac. :) Pics to come.
|
Is this guy trying to add boost to the car next to him?
https://www.miataturbo.net/attachmen...ine=1321557085 |
Originally Posted by Golferluke
(Post 796511)
Edit:
Who's is this? Interested in what he did with the ac canister. https://www.miataturbo.net/attachmen...ine=1321557085 levnubhin's. it's a 99 so easier to do over the top like this. 12x12x3 IC. |
Originally Posted by Miater
(Post 796487)
How about some shots of the hoods? Assuming they have been modified to run "over the top".
|
Originally Posted by aaronc7
(Post 796554)
You can bend the AC canister out of the way. I followed the trackdogracing instructions pretty much for my diy setup
|
2 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1321627303
hotside https://www.miataturbo.net/attachmen...ine=1321627303 coldside 3" it's a dual backdoor FMIC so its basically 2 90 degree couplers and 5-6" of pipe |
That is inspiration right there!!! ^
|
| All times are GMT -4. The time now is 08:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands