Loud Valvetrain Knock ~1800rpm (Video)
Hey everyone!
I’ve got a freshly built turbo 1.6, only ran a few times so far. Everything is going great except for this stupid loud noise coming from what i believe is the valvetrain just under 2000rpm. The motor sounds great at idle and when i took it for a test drive i didn’t seem to hear the noise at all over 2000rpm. Oil pressure looks good, the gauge reads perfect numbers and i tested it via the turbo oil feed line into a bottle. However when we changed the oil after the first heat cycle there didn’t seem to be any oil in the filter. Here’s a video of the noise. If anyone can point me in the right direction i’d appreciate it!! |
Originally Posted by stockrocket
(Post 1637167)
Hey everyone!
I’ve got a freshly built turbo 1.6, only ran a few times so far. Everything is going great except for this stupid loud noise coming from what i believe is the valvetrain just under 2000rpm. The motor sounds great at idle and when i took it for a test drive i didn’t seem to hear the noise at all over 2000rpm. The noise can only be heard when the car is warmed up. Oil pressure seems to be good as well, i tested it via the oil feed line with a bottle. However when we changed the oil after the first heat cycle there was no oil in the filter. Here’s a video of the noise. If anyone can point me in the right direction i’d appreciate it!! After looking over everything all day and bouncing some ideas off friends, i found the belt tensioner was loose and bangin around. Tightened it up and now the motor sounds tits 🤙🏼🤙🏼 |
What about the, No oil in the filter? I'd like to have no oil in my filter when I unscrew the thing. :drool:
|
Originally Posted by NA6POPS
(Post 1637197)
What about the, No oil in the filter? I'd like to have no oil in my filter when I unscrew the thing. :drool:
|
Something isn't right there. ALL of the oil that goes into the engine goes through the oil filter. No oil in filter = no oil in engine.
|
I would check the drain back valve/diagram on that oil filter. I’ve caught a bad one before install before.
|
Remote filter? Crossed lines?
|
Originally Posted by ConeCrasher
(Post 1637216)
I would check the drain back valve/diagram on that oil filter. I’ve caught a bad one before install before.
|
Originally Posted by Gee Emm
(Post 1637217)
Remote filter? Crossed lines?
|
All times are GMT -4. The time now is 04:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands