Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)

- DIY Turbo Discussion (https://www.miataturbo.net/diy-turbo-discussion-14/)

- - Moss fuel rail? (https://www.miataturbo.net/diy-turbo-discussion-14/moss-fuel-rail-26992/)

modernbeat

10-10-2008 07:40 PM

Moss fuel rail?

I've been looking for a bolt-on, no-fab fuel rail for my '99 engine and was holding out on buying the M-tuned rail to see if the fitment problems got solved. Someone on M.net posted something about a Moss Motors rail. I didn't know they made one and looked it up.

Moss Fuel Rail

Has anyone used it? Does it fit a '99 OK? Any problems? What fittings is it tapped for? 3/8" NPT?

Original M.net thread here:
http://forum.miata.net/vb/showthread.php?t=302153

M-Tuned

10-10-2008 07:48 PM

Quote:

Originally Posted by modernbeat (Post 318358)

I've been looking for a bolt-on, no-fab fuel rail for my '99 engine and was holding out on buying the M-tuned rail to see if the fitment problems got solved.

I can tell you that we have sold a ton for 99 engines and the install experience is quick and easy. I've had people grind the required area in 30 seconds with a hand file.

Don't let it worry you... M-Tuned is 3/8npt with a very large bore. I believe the Moss is 1/4npt from what I have seen.

mattkock

10-12-2008 07:48 AM

Hey Marc what about for a 2003? I was wanting one also.

M-Tuned

10-12-2008 10:38 AM

Quote:

Originally Posted by mattkock (Post 318776)

Hey Marc what about for a 2003? I was wanting one also.

It works on a 2003. You will have to file the middle rail mount on the head a VERY VERY small bit. Complete instructions are included with the rail, and this does not interfer with putting the stock rail back on later.

Enjoy!

All times are GMT -4. The time now is 09:27 AM.