Originally Posted by ZX-Tex
(Post 398759)
What did you use? I have been thinking about doing that very thing but have not found any resonated tips yet, that I like, that are small enough to fit. 3" inlet, short body length.
|
Originally Posted by ZX-Tex
(Post 399000)
Hustler just to be sure are you talking resonator tips or mufflers? I'm looking for a tip I could add to the existing system to make it a little quieter.
|
Sir I challenge you to a duel.
.... With my duals. |
I challenge you both, with my cowl induction and ported compressor housing. Nyeah.
I like the Ansa tips, they just do not have one with a 3" inlet, and I am not sure I want to run a reducer just for the tip. |
Originally Posted by Ben
(Post 399255)
Sir I challenge you to a duel.
.... With my duals. |
Originally Posted by ZX-Tex
(Post 399270)
I challenge you both, with my cowl induction and ported compressor housing. Nyeah.
I like the Ansa tips, they just do not have one with a 3" inlet, and I am not sure I want to run a reducer just for the tip. |
Yeah I tired the google thing too and I keep turning up the same sources. I am going to try ebay and jeg's next. I already looked at Summit. Monza also has some nice compact tips but do not make one with a 3" inlet.
Ahh, there we go. Hooker, although an old school name, makes one with a 3" inlet. Not sure if 10" will fit lengthwise (that is what she said). http://www.jegs.com/p/Hooker/744873/10002/-1 |
3" fence-post out the back of the bumper > faggy ricer-tip shit
|
Originally Posted by hustler
(Post 399279)
I summon johnwag to ready the camera!!!
Sounds like a Suby and center dumps. 18 resonator and Borla is your friend! ;) |
Originally Posted by hustler
(Post 399461)
3" fence-post out the back of the bumper > faggy ricer-tip shit
|
Kittys do to..... or so I've just read! ;)
|
There are tons of tips on ebay- find a 3.5" you like, chop it off at the taper so it'll slide over the 3" exhaust and tack it in place.
|
Well I want a resonating tip that is short, like less than 10" so I can fit it on the existing enthuza tail pipe (cutting it down to the bend) and not have it stick a mile out of the bumper. Those seem to be harder to find.
|
Ahhh- ok. Yes, I'm in a similar situation - I think with my magna since it's angled and the offset exit hole is very close to the bumper exit. Your's like this?
http://i158.photobucket.com/albums/t...t/IMG_4750.jpg |
Yeah pretty much. The muffler is not angled but I do not have much more space to work with than what you show above. So far the Hooker is the only thing I have found in a 3" inlet that comes close to working. The Monza would be even better (it is shorter) but they do not have a 3" inlet option.
|
Going by buddy's shop shortly.....I'll see what he's got laying around. Might have some options for ya. Who knows?
|
or maybe a can of spray chrome :giggle:
|
/\ ;) he he
He's got some resonated tubes that can be sectioned to you desired length and inlet. They aren't tunable, but scrap is scrap. |
Thanks I appreciate that. I bought one of the Hooker tips so if that does not work out I'll PM you.
|
More 3" Enthuza w 3" CAT whoring vids
|
All times are GMT -4. The time now is 04:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands