Intercoolers Where to Buy
#2
http://cxracing.com/
18 x 6 x 3 seems to be the most favorable one. ( i have one too) According to braineak it seems good for up to 366hp
18 x 6 x 3 seems to be the most favorable one. ( i have one too) According to braineak it seems good for up to 366hp
#3
http://cxracing.com/
18 x 6 x 3 seems to be the most favorable one. ( i have one too) According to braineak it seems good for up to 366hp
18 x 6 x 3 seems to be the most favorable one. ( i have one too) According to braineak it seems good for up to 366hp
#11
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
I can gaurantee a 24" ic will fit in front of the radiator, with a/c. Mine is 17" core but 24" WOA, with pipes around the radiator like Stripes and Braineack.
are you going under the radiator or over? or v mount?
Rob, does that big 25x12x3 ic fit between the stock hood latch and mouth funnel?
are you going under the radiator or over? or v mount?
Rob, does that big 25x12x3 ic fit between the stock hood latch and mouth funnel?
#16
Loki,
I think the one you want is the same as I bought from CXracing off ebay. They don't have every model on the website. Several times I've seen ones similar to the 12x18 but with one side inlet/ outlets. That's what I bought and will be running over the top of the rad. The one I got was one side, 2.5" inlet and outlet, 3" thick with a 10" x 11" core.
Email them what you want. They likely have more of them. It's an oddball so they don't advertise it often and charge a buttload for it.
I think the one you want is the same as I bought from CXracing off ebay. They don't have every model on the website. Several times I've seen ones similar to the 12x18 but with one side inlet/ outlets. That's what I bought and will be running over the top of the rad. The one I got was one side, 2.5" inlet and outlet, 3" thick with a 10" x 11" core.
Email them what you want. They likely have more of them. It's an oddball so they don't advertise it often and charge a buttload for it.
#19
http://stores.ebay.com/Just-Intercoo...QQftidZ2QQtZkm
Just intercoolers
Check my build thread and check out the EVO IC I stuffed in mine. It's 24x12x3.5 (3.5 thick I think)
Just intercoolers
Check my build thread and check out the EVO IC I stuffed in mine. It's 24x12x3.5 (3.5 thick I think)
#20
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
I went out and measured. A 24x12 looks like it would fit under the hood latch if it is pushed back as close to the radiator as possible.
My ic is a couple inches forward of the radiator. Looks like I could get maybe a 4" taller core in there. One of BEGI's 18x9x3 cores would be perfect. But I think they get on the order of $700 for it.
My ic is a couple inches forward of the radiator. Looks like I could get maybe a 4" taller core in there. One of BEGI's 18x9x3 cores would be perfect. But I think they get on the order of $700 for it.