my completed turbo pictures. version, uh, 2. 56k death.
new thread because this isn't a build anymore... shit's done.
it got me to work and back today (25 mi each way). only issue? the front brakeline came loose at the master cylinder. "ummm why does my brake pedal slowly go all the way to the floor? why is it doing it again? why is my brake warning light on?" easy fix, burnt finger, a 10mm wrench, and blue brake fluid later I'm rockin and rollin. So naturally since I had brake fluid EVERYWHERE, I had to clean up under my brake booster. and since I had to clean there, I cleaned my engine bay. And since I had to clean that, I figured I'd detail my engine bay. I picked up a sweet technique somewhere using Meguiars Super Degreaser and Hyper Dressing. Spray on, rinse off. Spray on, leave on. Then I figured I'll just wash the damn car. So I took pictures of the whole shmeal. 56k can lick my nut. STICKER LOVE. Black on Black. http://gallery.y8s.com/d/17006-2/DSC00269.JPG Painted my bumper / radiator shroud thing black. For no reason. http://gallery.y8s.com/d/17003-2/DSC00268.JPG Filter-Compressor-Turbine (jacketed)-wastegate. The top nut you see under the brake reservoir is the bitch. http://gallery.y8s.com/d/17000-2/DSC00267.JPG System 3/4 view. http://gallery.y8s.com/d/16997-2/DSC00266.JPG System front view. http://gallery.y8s.com/d/16994-2/DSC00265.JPG How my 9 day bumper spray paint job came out... http://gallery.y8s.com/d/16976-2/DSC00259.JPG Sixual. http://gallery.y8s.com/d/16991-2/DSC00264.JPG Can't wait to dyno this bitch. |
We'll have to go roll around town when I get out there in August. Two street terror Miata just mean 2x the fun.
Mark |
I think your turbo ate my turbo.
|
:bigtu:
Looks the goods, nice work! |
Originally Posted by Ben
(Post 110463)
I think your turbo ate my turbo.
|
that is sexy
|
Love it, Bravo!
|
looks nice, what turbo did you go with?
|
Nice shit, dude you live hella close, we need to meet up and let me grab a ride in that thing, it looks siiiiick.
|
Originally Posted by MX_Eva
(Post 110528)
Nice shit, dude you live hella close, we need to meet up and let me grab a ride in that thing, it looks siiiiick.
GO TO THE DYNO DAY WITH US SATURDAY. :vash: |
I cant believe you have those wheels... Everytime I see you you have new ones!
|
Originally Posted by Braineack
(Post 110557)
GO TO THE DYNO DAY WITH US SATURDAY.
|
Originally Posted by that7guy
(Post 110574)
I cant believe you have those wheels... Everytime I see you you have new ones!
stock circuit 8 konig rewind 6ul tires are another story.... the turbo is a GT2876R. details here: http://gallery.y8s.com/miata/turbo/gt25/ |
Ah...there are acceptable excusses...like I'm in college and it's finals week. Literally. I cried...almost :gay:
|
yeah, but if you're that close you could run over for the free good at lunch and share your excuse with everybody? I would. :ughug:
|
I'll see, it depends on how many more papers I have to write and how much 3D animating is kicking my ass. Hopefully it won't be too bad and then I can stop in and cry about how I still don't have a suitable turbo. I'd hate to do it, but I might just buy strait from AVO...they probably want some rediculous amount of money though.
I don't know if you guys have looked recently but they have a clearance on their old kits, it includes the piggy back with fuel and ignition control inculding 5th injector and O2 tuning and even launch control. It's really cheap as well at 620 dollars for full retail (for the piggyback anyway) |
Originally Posted by m2cupcar
(Post 110618)
yeah, but if you're that close you could run over for the free good at lunch and share your excuse with everybody? I would. :ughug:
|
With Maya?! Sweet....jk
I've already commited to making it up there for a bit this weekend, me and my GF will rock with you guys and go karting. Funny because then the weekend after I will be going to a RX meet at Severna Park (where I live.) which includes 7's and oldschools like 3's. Then in the same day go to a MR2 Dyno day with my G/F (Who has a 2) in Gaithersburg. Y8s you could probably meet up with us at the MR2 meet and stuff, there will be a "cruise" afterwards I'm sure we'll be the only 2 Miata's there. |
I no longer have my 3SGTE toting celica alltrac.... ;)
|
Looks great.............but what is that big ol donkey dick that the Greddy Type R is connected to for?
|
Haha, funny because I was actually looking at the number of people going, all tracs almost outnumber the MR2's.
I'll be so very jealous this weekend. >_< Someone sell me a T25 that's in good condition and isn't rediculous big! |
Originally Posted by y8s
(Post 110579)
haha this is only my FOURTH set of wheels. that's less than one per year.
stock circuit 8 konig rewind 6ul tires are another story.... the turbo is a GT2876R. details here: http://gallery.y8s.com/miata/turbo/gt25/ IF/When you decide to sell those 6uls...you will let me know first right? |
Originally Posted by Wideopentuning
(Post 110939)
Looks great.............but what is that big ol donkey dick that the Greddy Type R is connected to for?
to be fair, it doesn't hit anything there but yeah... maybe I can saw off about 5 inches and have it work. |
Where'd you get the miataturbo.net sticker?
|
welp...
for the 5 minutes they were for sale, I scored. |
maybe corky was thinking ahead and decided you were smart enough to be able to position it where you neede.
|
nice,
but was that a cell phone camera? |
Originally Posted by Pitlab77
(Post 111396)
nice,
but was that a cell phone camera? |
32 Attachment(s)
necropost dead picture repair time!
Since I was asked for a picture and mod list, here: Engine bay mod: https://www.miataturbo.net/attachmen...ine=1347384298 https://www.miataturbo.net/attachmen...ine=1347384298 https://www.miataturbo.net/attachmen...ine=1347384298 Thompson Automotive remote oil filter. https://www.miataturbo.net/attachmen...ine=1347384298 oh shiiiit shock tower brace pwn: https://www.miataturbo.net/attachmen...ine=1347384298 Garrett/Allied Signal GT2876R with .64 A/R hotside, 4" intake pipe, AEM Dryflow filter: https://www.miataturbo.net/attachmen...ine=1347384298 part number plate: https://www.miataturbo.net/attachmen...ine=1347384298 (nerds will note that it is for the .86 exhaust housing but I swapped) (also barely shown is one of the four Tein Flex shocks. rates 7kg F and 6kg rear--that's about 400 / 340 lb/in) Oh and rear sway is disconnected but I have it. Koyo 37mm radiator and Greddy Type R blowoff valve https://www.miataturbo.net/attachmen...ine=1347384298 TiAL 38 wastegate and INTACT DIPSTICK! https://www.miataturbo.net/attachmen...ine=1347384298 BEGi "#2" intercooler with custom piping to fit my setup. Lots of rock chips on my bumper and a hole. Has mount for air temp sensor and a bung for water injection. https://www.miataturbo.net/attachmen...ine=1347384298 949 Racing 6UL in Nickel (15x8 gen 1) backed up with Goodwin big brake kit Version 3 (light rust is from not driving the car in a few days) https://www.miataturbo.net/attachmen...ine=1347384298 https://www.miataturbo.net/attachmen...ine=1347384298 Optima yellow top with power distribution block and big ass fuses: https://www.miataturbo.net/attachmen...ine=1347384298 Clear lens LED tail light https://www.miataturbo.net/attachmen...ine=1347384298 Hard Dog M2 Hard Core Double Diagonal with slim padding and leather cover: https://www.miataturbo.net/attachmen...ine=1347384298 Feet-dirtied mazdaspeed miata pedal treads: https://www.miataturbo.net/attachmen...ine=1347384298 INTERIOR: What's-that-guy from M.net perforated leather shift boot and brake cover with red stitching to match the Nardi Deep Corn steering wheel. https://www.miataturbo.net/attachmen...ine=1347384298 Defi Link white face gauges (boost, oil pressure, EGT, water temp) https://www.miataturbo.net/attachmen...ine=1347384298 Defi Link Control Unit II (screwdriver not included) https://www.miataturbo.net/attachmen...ine=1347384298 Best mod ever, both sides. black. https://www.miataturbo.net/attachmen...ine=1347384298 https://www.miataturbo.net/attachmen...ine=1347384298 Racing Beat 1.25 inch tubular front sway bar and shot of piping. https://www.miataturbo.net/attachmen...ine=1347384298 3.5 inch stainless steel slant tip, dirty and needs a cleaning: https://www.miataturbo.net/attachmen...ine=1347384298 22x11 big magnaflow muffler, 3" exhaust piping, V-bands everywhere (no bolt on flanges) https://www.miataturbo.net/attachmen...ine=1347384298 My dirty diff. Inside: KAAZ clutch-type LSD (set to maximum lockup) with KAAZ oil and 3.9 ring and pinion (stock is 4.3) https://www.miataturbo.net/attachmen...ine=1347384298 passenger seat in good condition: https://www.miataturbo.net/attachmen...ine=1347384298 Custom built megasquirt 3x with knock and general awesomeness. https://www.miataturbo.net/attachmen...ine=1347384298 Custom harness that plugs into stock ECU connectors (there are a couple other connectors behind the glove box for ignition, boost, etc. the entire harness can be removed without cutting any wires) https://www.miataturbo.net/attachmen...ine=1347384298 https://www.miataturbo.net/attachmen...ine=1347384298 Driver's side seat with minor wear from my stainless steel wallet poking through my pants: https://www.miataturbo.net/attachmen...ine=1347384298 https://www.miataturbo.net/attachmen...ine=1347384298 Door jamb sticker: https://www.miataturbo.net/attachmen...ine=1347384298 Stuff not necessarily shown: Performance: GT2876R Turbo (internal gate welded shut) BEGi #2 Intercooler custom made for my setup ETD Racing tubular header TiAL 38 external wastegate home built stainless steel downpipe home built 3" v-band exhaust (metal cat, resonator, big muffler = nice and quiet) Megasquirt 3X (with VVT, knock sensing, and boost control) RC 550cc/min injectors Toyota Coil on Plug conversion Vishnu dual feed fuel rail GReddy Type R blowoff valve Thompson Automotive oil filter relocation FM Level 1 clutch and steel light flywheel KAAZ limited slip diff (set to max locking) 3.9 ring and pinion Mazdaspeed motor and diff mounts Track Dog Racing front lip spoiler. miataturbo.net mother effin stickers!!!!! Handling: TEIN Flex coilovers Racing Beat 1.25" tubular front sway bar (set to soft) no rear sway bar (I still have the stock bar) Goodwin Big Brake Kit (hawk HPS pads, and lots of spares) Mazdaspeed shock tower brace modified so master cylinder brace is on the correct side 949 Racing 6UL wheels and Hankook RS2 tires Interior: Defi-Link boost, oil press, egt, and water temp gauges Defi-Link Control Unit II Nardi Sport Rally steering wheel mazdaspeed miata pedal covers alex eggo shift knob 70mm shift lever extender (not installed) Hard Dog Hard Core Double Diagonal rollbar with padding and leather cover. red stitched black perforated leather shift boot and e-brake boot Show Not Go: Black painted headlight bezels Philips VisionPlus +50% headlight bulbs Alpine CDA-7897 head unit Jamo door woofers / LPG tweeters mounted to windshield 10" TC Sounds sub (going to pull this out) Clarion 4x75W amp JL audio 500/1 sub amp (going to pull this out) KEE Cloth OEM style top with glass rear window clear LED rear center brake light Interior trunk release disconnected Alpine alarm with window up/down module Optima yellow top battery |
FINALLY I get to see it in all of its awesomeness instead of random pictures here and there. I love this car. Just about everything about it. Its a shame you're getting rid of it, but then I never knew you had is as long as you did. Just hope new owner takes good care of it.
|
I guess when a thread is 5 years old, you need a double post to resuscitate it :P
|
anything less would be uncivilized.
|
Originally Posted by thenuge26
(Post 925673)
I guess when a thread is 5 years old, you need a double post to resuscitate it :P
Originally Posted by Braineack
(Post 925674)
anything less would be uncivilized.
|
I would sell a baby for that car.
|
4 Attachment(s)
oh heck, did i post these yet?
https://www.miataturbo.net/attachmen...ine=1347393652 https://www.miataturbo.net/attachmen...ine=1347393652 https://www.miataturbo.net/attachmen...ine=1347393652 The MINI really is a tiny car: https://www.miataturbo.net/attachmen...ine=1347393652 |
So this car is really just a headlight and paint restoration away from pretty awesome*.
And properly running engine? |
I'm probably going to attempt a headlight polish sometime in the near future.
I am not going to touch the front bumper, but may thoroughly wash and clay the paint and do a quick polish and protect. Potential buyer wasn't concerned about the bumper but I could probably have done that for about 500. Engine runs fine and has excellent leakdown numbers. I'm going to drive it to work tomorrow. All it needs is the 90k service done. I'm going to bum some garage space for that soon. |
Originally Posted by y8s
(Post 925739)
I'm probably going to attempt a headlight polish sometime in the near future.
I am not going to touch the front bumper, but may thoroughly wash and clay the paint and do a quick polish and protect. Potential buyer wasn't concerned about the bumper but I could probably have done that for about 500. Engine runs fine and has excellent leakdown numbers. I'm going to drive it to work tomorrow. All it needs is the 90k service done. I'm going to bum some garage space for that soon. I use a mixture of cream wash and water in a spray bottle. Off the top of my head I forget exactly what grit paper we use, but I go through 3 stages, then polish, then wax. They come out tits every time. |
Oops. Confused you with Lars for a minute.
By the way: your avatar fills me with uncomfortable awkwardness every time I see it. And not in a good way. |
Originally Posted by y8s
(Post 925635)
Driver's side seat with minor wear from my stainless steel wallet poking through my pants:
https://www.miataturbo.net/attachmen...ine=1347384298 Maaaaang either thats a tiny waste or you sit against the door. Subbed for the awesomeness. |
headlight buff/polish is easy peasy. get 1500 or 2000 grit and a soft pad, and buy one of those Mothers headlight kits sold at Wal-Mart for like 15 bux. Throw the little thing in a drill, and polish that shit in there at like 1000rpm never stopping in 1 spot too long.
Just did a 2 sets last week: takes all of 15-20 min and I'm slow |
|
Give it to fae, he'll fix them. :fael:
|
Originally Posted by triple88a
(Post 925807)
Give it to fae, he'll fix them. :fael:
thanks for the tip eighteen psi |
1 Attachment(s)
Originally Posted by Scrappy Jack
(Post 925782)
Oops. Confused you with Lars for a minute.
By the way: your avatar fills me with uncomfortable awkwardness every time I see it. And not in a good way. https://www.miataturbo.net/attachmen...ine=1347411446 or this: https://i.chzbgr.com/completestore/1...Sj4gokYdQ2.png
Originally Posted by triple88a
(Post 925787)
Maaaaang either thats a tiny waste or you sit against the door.
Subbed for the awesomeness. |
Bogz looks like an inverted penis and the fact that I recognize that makes me uncomfortable in my workplace. Stop sexually harassing me.
Also, maybe you should rethink the upside/downside of your stainless steel wallet. |
Originally Posted by Scrappy Jack
(Post 925893)
Bogz looks like an inverted penis and the fact that I recognize that makes me uncomfortable in my workplace. Stop sexually harassing me.
Also, maybe you should rethink the upside/downside of your stainless steel wallet. bogs will remain because he's obscurely disgusting. also the original stainless wallet eventually cracked (it's VERY thin and I guess you can't carry 10 $1 bills without stressing it) and I got it replaced with a leather-covered stainless wallet. It's been much kinder to pants and seats. Sidenote: Stewart/Stand has redesigned the fold hinge to be more forgiving of ... strippers I guess so it has a better bend life. here is the one I rock now: http://www.stewartstand.com/collecti...billfold_black Note the "thickness" dimension of 0.188". oh yeah. eat your heart out George Costanza! |
Not enough room for singles... not good enough.
|
All times are GMT -4. The time now is 03:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands