My New Set Up
my set up is :
2.0 L Botom end with solid 350 lb billet of steel crank by Moldex, power enterprise crank metal set , H-beam carrillo rods , Wiseco, feature an extremely short compression height, a low-friction moly coating and custom ceramic barrier coating with zylan skirt coating a 9:1 compression ratio, custom oil pump with billet gears kit , ATI super dumper , TODAmetal gasket , TODA Valve Train Kit, TODA Lock Lash Adjuster, TODA cams , TODA cams gears , TODA timing belt , FEREA intake valve , FEREA exhaust valve, ARP small bolt for main crank pulley , ARP head studs , ARP main cup studs , Flying Miata oil thermostat kit , MAZDASPEED motor mount , MAZDASPEED differential mount , MAZDASPEED low thermostat (68 c ), KOYO 53mm radiator, SAMCO radiator hoses , SARD radiator cap, HKS circle eath kit , O.S. GIKEN twin clutch , RX7 FD3 tranny , CUSCO 1,5 LSD type RS, GT 3540R turbocharger , JG EDELBROCK VICTOR X intake manifold, 80 mm custom throttle body HKS 85mm titanium exhaust , GREEDY oil cooler , GREEDY TYPE RS BLOW OFF GREEDY PROFEC B SPEC 2 boost control HKS F-CON V-PRO 2 V.34 JAPAN VERSION ecu, HKS V-PRO NAVIGATOR , SARD 1000cc injectors , ΟHLINS custom Separate Tank Type Suspension kit , KOSEI 17 whells , TOYO R888 tire, BREMBO front calliper with 330 mm disk , stock rear calliper with 300 mm disk . and i thinking about oil pump rev limit up. HAVE ANYONE THIS PUMP ? |
So how much power you gonna be putting down? If its going to be less then what you would have made by swapping an LS1 into the car then its gonna make me a sad panda.
|
He wants to know how high he can rev the billet oil pump gears etc. I think 8500-8800 but i have no direct experience could someone with real experience plaese post up. :bigtu:
|
Whats Markp running his to? like 9k?
|
Sorry for hijacking the thread... how high can I rev the motor w/ stock valve springs? (bottom end is fully balanced w/ pulley and flywheel attached).
|
7400 rpm stock hla's suck
|
Originally Posted by Dhaark
(Post 133095)
Sorry for hijacking the thread... how high can I rev the motor w/ stock valve springs? (bottom end is fully balanced w/ pulley and flywheel attached).
|
if you read my set up you see tha i have good valve springs
and billet oil pump gears |
I believe they were replying to Dhaark's thread-jack. :p
As for you billet gears, try contacting a company that makes them, such as miataroadster, and see if they have any data on rev limit. |
http://www.imageshack.gr/files/erzlywhiruxko8pedhsl.jpg
http://www.imageshack.gr/files/sehcer5qe8da1kokoa1w.jpg http://www.imageshack.gr/files/p2vlud6rdogu1vuz6hav.jpg this is some photos but i have do changes i have now 60mm wastegate HKS new turbo HKS TO4Z with .82 AR , i have rev limit 8500 rpm |
Holy shit, videos man!
|
Originally Posted by Fireindc
(Post 321342)
Holy shit, videos man!
videos soon ;);) |
How about better pictures first.
|
Nice setup CEO :bigtu:
Please post your location below your Avatar. |
+1, more pics for sure. Flood this thread with pics. And tell us everything about that intake manifold.
|
That is a pretty intense miata to be sure.
|
Why a 60mm Wastegate, seems big for that setup? Planning on getting the thing down to 0-1 psi?
|
Holy shit. He built what I wanted and can't justify spending! :(
|
That is a sexy engine bay......ugg.
+1 on the intake manifold, as much info as possible. |
Originally Posted by mikef85
(Post 321410)
Why a 60mm Wastegate, seems big for that setup? Planning on getting the thing down to 0-1 psi?
6700rpm my boost go up and up and up :mad::mad::mad: now with Hks 60 mm external the pressure control its fine . the hks its 60 mm induser and 44 exduser , isnt like tial 60 mm for both . |
the intake manifold is endrblock victor x for honda b16a , it need litle work in flange
and its ready to fit . |
Originally Posted by CEO
(Post 321703)
the intake manifold is endrblock victor x for honda b16a , it need litle work in flange
and its ready to fit . |
Originally Posted by KPLAFIN
(Post 321705)
How much is "a little" ?
then you must close the hole of the intake injector and thats all . |
I am pretty sure there are decent writeups on the Edelbrock IM on m.net
|
it looks nice, but are you running 17" wheels? or is that the model name?
|
Originally Posted by CEO
(Post 321942)
i think everyone can do it, its easy , u must open litle the intake ports
then you must close the hole of the intake injector and thats all . Thanks |
I run 99 head
|
some street racing
here with evo 8 from rolling 80 klm evo have 650 hp : YouTube - CEO MX5 VS EVO HKS T51 SPL (PUMP GAS ) here with renault 5 rolling 60 klm renault have 550 hp: YouTube - CEO vs ΜΗΤΣΑΛΕΩΝ YouTube - CEO MX5 VS RENAULT 5 MHTSOS |
watching those crap videos of an awesome car is like having unrestricted access to a lesbian locker room but having to view it through a coffee straw hole.
|
:p
|
Amazing build. Would be great to see the rest of the car. Curious about what you have done with the exterior for aero and venting.
What kind of power are you making with that? |
Wow. Do you have any better quality pictures or video?
That is amazing. What is your horsepower? |
Looks fast for sure! :bigtu:
Vash- |
πολύ ωραία!
|
i γυναικών φορούν σώβρακο
|
WOW:eek5:, nice to see a REALLY fast miata on the streets.
+1, more pics of this amazing car |
Nice! So, when are you going to make it fast? :)
|
All times are GMT -4. The time now is 12:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands