miataspeed1point6

iTrader: (1)

FWIW my Greddy manifold has been on 3 cars with 3 different owners with a fair bit of miles (10k minimum). No relief cuts and no cracks.

zoom2zoom

iTrader: (5)

Got the big brakes put on the rear, fronts are today's project. Takes twice as long when everything is rusted together, had to replace the rear hard line and the caliper bolts were completely dried out.

zoom2zoom

iTrader: (5)

and the tires

zoom2zoom

iTrader: (5)

I will try to post more pics once the brakes are done and get the wheels put back on. Waiting on some small turbo parts.

rleete

iTrader: (21)

Those backshields are pretty hammered. But isn't it nice to finish, and see the shiny new rotors?

localtech

iTrader: (4)

Good luck with your build man. It looks like you are doing all of the right things.
When I first saw the ebay cast mani I freaked out. I cant believe that they havent made one for the 1.8 yet.
Good luck!

BTW thicker aluminum radiator should correct your heating problem. Or the good old re-route...

nicacus

iTrader: (7)

What the hell?? why wasn't I invited?!?!

zoom2zoom

iTrader: (5)

Yeah, they took a bit of abuse to get them away from the rotors, the fronts required almost no effort at all, but did have to replace the driver side hardline from the master cylinder.

zoom2zoom

iTrader: (5)

I have an FM race radiator on the shelf should I choose to use it.

zoom2zoom

iTrader: (5)

Installed the Torsen yesterday, but Napa sold me the wrong diff seals!! The downpipe should be made by end of the week.

the90iestredmiata

inspiring.

nicacus

iTrader: (7)

Seriously you should call me.. I have nothing to do every other week

mazda/nissan

iTrader: (2)

MOAR PICTARS!!!!

zoom2zoom

iTrader: (5)

Are you just not too bright or simply bumping the thread?

mazda/nissan

iTrader: (2)

well where is that downpipe?

zoom2zoom

iTrader: (5)

Common sense would tell you that if it was done it would be posted!!

jwarriner

Just curious what you think the odds of this thing fitting with that setup would be:



Or this less "low pro" one:

zoom2zoom

iTrader: (5)

Are those ATP pieces?

jwarriner

Yeah, they are.

zoom2zoom

iTrader: (5)

the ATP pieces use a 3in pipe and won't mate up with the 2.5in v-band oulet I'm using from them.