Whats everyone using Custom for sparkplug wires
#3
http://www.kingsbornewires.com/categ...?categoryId=99
All the parts you need to make your own, or they will assemble anything you want. Very high quality, great customer service, and some of the cheapest stuff I've found.
All the parts you need to make your own, or they will assemble anything you want. Very high quality, great customer service, and some of the cheapest stuff I've found.
#8
last week magnacore quoted me $160 for 8.5mm wire 12" long with mazda spark plug ends and ls coil ends. that was too much so i asked for just the boots and terminals and it was only $18...then i got msd bulk wire 8.5mm 6' and the msd crimper at the local speed shop for $28 tax in. (where did the other $114 come from?)
#15
Elite Member
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,893
Total Cats: 399
My toyota COPs don't like to fire when temps get cold & battery voltage goes below ~11volts or so. Instead of buying a new battery I swap back to the OEM coils for the winter and run MSD wires.