Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   DIY Turbo Discussion (https://www.miataturbo.net/diy-turbo-discussion-14/)
-   -   my turbo sucks! (https://www.miataturbo.net/diy-turbo-discussion-14/my-turbo-sucks-36746/)

ctxspy 07-04-2009 04:04 PM

my turbo sucks!
 
Actually it's the sound i'm annoyed by :giggle:

It's such a loud sucking hiss .. it's as loud or louder than my bypass valve which is currently venting to atmospherre...

I put whatever damplifier pro i had left on my hood, (a little over a square foot) but that didn't make ANY difference at all.

Would making a heat shield / cold air box reduce the noise? Could i soundproof that??

I used to enjoy just driving around in the miata.. Then i wanted a little more power b/c it was embarassing. Now, i've got enough power, but i feel like a boy racer.. my exhaust is too loud, i have a whooshing BOV, and my intake sounds like a deflating tire!

:vash:

Splitime 07-04-2009 04:17 PM

Trade the turbo kit in for a Camry?

curly 07-04-2009 04:21 PM

recirculate your BOV to quiet it down, make sure you don't have a boost leak, get a K&N filter (cheap ones will make more noise than others), and add another muffler to your exhaust, problem solved.

Saml01 07-04-2009 04:57 PM

Grow a pair of balls.

ctxspy 07-04-2009 05:55 PM

Sam, fuck you -- your 1.6L valve cover is still waiting for you ;-) Given enough time i may get bored and start polishing it to see how bad i can screw it up.

I have a begi-s, it hink it came w/a K&N... i will also get a new exhaust at some point, hopefully a 3"..

I will be checking for a boost leak once i get my new intake tract..

Thanks guys

-Tomaj

kotomile 07-04-2009 06:51 PM

http://adweek.blogs.com/photos/uncategorized/tampax.jpg

Braineack 07-04-2009 07:13 PM

My cold air box reduces the volume of the sucking noise significantly.

messiahx 07-04-2009 07:28 PM


Originally Posted by Braineack (Post 426833)
My cold air box reduces the volume of the sucking noise significantly.

That's probably the best you can do short of getting your testosterone injections. If you reposition the filter to a spot with more empty space around it, that would probably help, too. If you're still running the stock exhaust, it will only get much louder with a 3" setup.

ctxspy 07-04-2009 08:02 PM

Hey,

I'm using this exhaust:
Got a deal on an exhaust! - MX-5 Miata Forum

Before the turbo, this exhaust was ridiculously loud to the point i was going to toss it, having bought it just a few months earlier!

And i found this thread while looking :), seems i'm not the only one who likes quiet!
Stock muffler with turbo - MX-5 Miata Forum

I'll be looking into the cold-air box... Braineack -- did you build it yourself? if so, out of what? (aluminum, thickness, how much material, how did you join @ the bends - welding?)

-Tomaj

skidude 07-06-2009 09:10 AM

Mine was way too loud also, and I got harassed for asking how to quiet it down. At the moment I have a hot-air intake that isn't too loud but I plan to try turning it into a quieter cold air intake.

ctxspy 07-07-2009 12:33 AM

i bought some silicone tubing to make a new (straighter) intake... once that's done, it's time to make the cold air box, i'll probably do something similar to this:

https://www.miataturbo.net/forum/t35127/

elesjuan 07-07-2009 02:10 AM

if its too loud take it off and ship it over to me. I won't cry about it.

:rolleyes:

Saw a thread on m.net about this once.. Retarded..

http://jugrnot.com/IntakeMuffler1 (Large).jpg

ctxspy 07-11-2009 11:13 PM

i build "version 1" of my cold air box. it's rude & crude but works, it's definitely a little quieter now. i stuck some leftover damplifier on it ;-)

I bought 2x2 ft aluminum sheet, and cut it in half. I then cut, fit, repeat until it was more or less OK for the bottom end. i then cut the top end by eyeballing the line from the side and marking with a pen.. not ideal, but OK for a rough draft.

for the intake hole, i just cut a "U" out as opposed to making an actual round hole (version 2 will have that).

I notched all along the edges and folded the metal back to make a smoother edge, then pushed some fuel line onto the edges to create a softer edge.

right now it's not perma-mounted with any tabs or whatever, but seems fairly stable because the cutout for the intake is tight enough to hold it tight.

Here's a quick question -- i was planning on using some 'hot water pipe' insulation for the edging instead of the fuel line... do you think this foam tube will be able to withstand underhood temps?

-tomaj

dustinb 07-11-2009 11:22 PM


Originally Posted by elesjuan (Post 427533)
if its too loud take it off and ship it over to me. I won't cry about it.

:rolleyes:

Saw a thread on m.net about this once.. Retarded..

http://jugrnot.com/IntakeMuffler1 (Large).jpg

I'm sorry but that's worth a lol.

ZX-Tex 07-11-2009 11:52 PM

^^ Yeah that is a Mega-fail. If I was FM, I would sue for having my name within 10 feet of that car.

If you enclose the filter and/or add some ducting (smooth wall) it will help lower the sound level. Something like a BEGI-style air box would make a difference.

jeff_man 07-12-2009 12:45 AM

your car turbo to loud...


http://www.dontgomovement.com/missing.jpg

i have a mp62 and it's annoying when it's not screaming at other cars.

mike_671 07-13-2009 06:54 AM

1 Attachment(s)
Attachment 204769

ctxspy 07-13-2009 11:25 PM

So since we all drive girlie cars, we must make them loud and obnoxious to compensate, show everyone how manly we are. got it.

In the meantime -- I built my 2nd version of the box.. i used the hot water foam around the top to seal against the hood, and the fuel line along the sides and bottom.

I'll probably build version 3 in a few months once all the cuts on my hands healed :-D

elesjuan 07-14-2009 12:15 AM


Originally Posted by ctxspy (Post 430097)
So since we all drive girlie cars, we must make them loud and obnoxious to compensate, show everyone how manly we are. got it.

For the record, do you drive a honda civic or a miata?? :giggle:

ctxspy 07-14-2009 12:54 AM

I can put an end to all this sissy talk once and for all, here I am tearin it up in my car

vroom vroom

elesjuan 07-14-2009 01:20 AM


Originally Posted by ctxspy (Post 430119)
I can put an end to all this sissy talk once and for all, here I am tearin it up in my car

vroom vroom

R. O. F. L.

Leave it to the Engrish! :bowrofl:

ctxspy 01-18-2010 07:31 PM

OK so i'm back on this :)

I bought some "luxury liner" and heat shielding from second skin.

the luxury liner is a sound absorbing foam and i had to get 9 sq ft at the minimum so i figure i'll lay some down in the trunk and near the firewall area under hte carpeting.

I'll post back in a week or so once i'm all done!

Turbo_4 01-18-2010 08:31 PM

Wow

miataspeed2005 01-19-2010 07:50 AM

I get bonners from turbo spooling sound

ctxspy 01-28-2010 08:22 PM

I received the stuff from second skin and applied it to my makeshift cold air box.

I only drove aroud w/the top up for 2 minutes because its super cold right now but so far it didn't seem to make a damn bit of difference :)

FWIW i put the heat shield on the outside of the box and the luxury liner (closed cell foam) on the inside.

The top of the box is not closed, which is where i think a lot of the noise is coming from.

-Tomaj

ctxspy 01-29-2010 10:53 PM

UPDATE

I drove the car to work today and had an opportunity to take a better listen under different load conditions.

The sound deadening definitely made a difference! Under heavy acceleration the noise is definitely muffled and i'm finally able to hear the exhaust vs just the intake noise.

I'm hoping once I fully enclose the intake (cover the top of the box w/aluminum & deadener) i think it will lower the sound further.

-tomaj

18psi 01-29-2010 11:04 PM

The day I'm annoyed by the sound of my turbo spooling is the day I'll consider myself an old fart getting ready to die

ctxspy 01-29-2010 11:17 PM

lol i guess this thread has a limited audience

WonTon 01-29-2010 11:24 PM

my car is loud as fuck.............quiet cars are for pansies! :giggle:

gospeed81 01-30-2010 07:54 AM


Originally Posted by WonTon (Post 515565)
.......quiet cars are for pansies! :giggle:

Or for guys who get tired of their wife asking wtf is that noise every time they shift, or why it sounds like a big rig when we hit an on-ramp.

I'm so going stealth BOV and sound deadening for the compressor.

New ARTech exhaust should sound nice, and that's all she needs to hear unless I'm really on it.

Mine makes way to much compressor/bov noise. It sounds like a pissed off air compressor during regular driving. I want it to be civil most of the time, and then open up when I'm driving hard.

Eadohcturbo 01-30-2010 08:32 AM

1 Attachment(s)
Attachment 200849

y8s 01-30-2010 11:30 AM

run a bigger turbo. my shit's quiet like nothin.

gospeed81 01-30-2010 11:38 AM


Originally Posted by y8s (Post 515654)
run a bigger turbo. my shit's quiet like nothin.

This I want to do.

Unfortunately limited by crappy IHI flanged manifold. God I hate that thing. If Abe gets back to me expect to see this crap coming soon to a FS ad near you.

ctxspy 09-05-2010 10:03 AM

final update, i promise.

I bought a leftover 'prototype' cold air box from begi for a great price. It took some modification to fit, but it's worth it.

I added a couple of mounting plates with 3" hose connectors on them to either side of the cold air box. this allowed me to seal the box, mounting the air filter inside the box to one plate, and the intake hose on the other side to to the other plate.

I also cut out a small section of the box so that my NACA duct feeds directly into the box, and sealed around that cutout with closed cell weather stripping foam.

Finally, i glued a couple of pieces of the luxury liner inside the cold air box, and glued the heat shield material to the outside of the box.

RESULT -- my intake is much quieter!! In the past, full throttle after 3500 rpm became an annoyingly noisy affair. Now it's barely audible at 3500, and even at full throttle it's only a pleasant reminder of the turbo's presence.

-Tomaj

adamhershner 09-05-2010 10:11 AM

Turn your hearing aid down! I run a 3" straight pipe on my car along with a vent through the hood right over the turbo, it's nowhere near embarrassing.

mazpr 09-05-2010 10:18 AM

Drive a Honda Civic with a fart can and without resonator for a week, THAT is loud.

94blackmx5 09-05-2010 10:44 AM


Originally Posted by skidude (Post 427204)
Mine was way too loud also, and I got harassed for asking how to quiet it down. At the moment I have a hot-air intake that isn't too loud but I plan to try turning it into a quieter cold air intake.

That set aside. Why the hell is your car for sale on craigslist? There are only a few of us in Maine. Selling you car is like selling your soul.


All times are GMT -4. The time now is 02:15 AM.


© 2024 MH Sub I, LLC dba Internet Brands