Need help identifying downpipe flange
 

As the title suggests; I bought a custom made 2.5" straight pipe exhaust system with a flex pipe connecting to a downpipe. The PO said that the flange in the photo (downpipe) was connected to an elbow that led to the turbo.

My turbo came off a 240, and has an elbow that I won't be able to use as the flange is different. I'll have to get something custom made when the system goes on the car in a few weeks, but I could use some help identifying the downpipe flange. I'll probably end up cutting up the elbow I have and creating a Frankenstein-pipe.

If it helps, here is a photo of where the downpipe WOULD connect to the elbow if they matchedhttps://cimg3.ibsrv.net/gimg/www.mia...b021aed796.jpg
https://cimg4.ibsrv.net/gimg/www.mia...a76ac562da.jpg
up (as well as the turbo-to-elbow, in case anyone has suggestions as to how to make the new elbow)

Flyin miata


https://www.flyinmiata.com/media/cat...g_2376_1_1.jpg

Wow, great news! Hopefully they sell an elbow for the T25/28. Thanks a lot :)

they do sell just the elbow, its pricey.
https://www.flyinmiata.com/turbine-o...r-section.html

you need the elbow AND the manifold.

Yup, f'n ridiculous for a tiny piece.

Already have a BEGI manifold

Begi manifold will place the turbo differently and wont allow the downpipe to line up. If you want it to bolt right up, then you will need the FM manifold and turbo elbow.

Yeah, no way I'm spending $3XX CAD for an elbow. Going to go the custom fab route, I have a friend who has lots of exhaust hacking experience so we'll figure something out. Thanks for the advice

you already have turbo and begi manifold, so you can buy just the downpipe from begi and be set.

I am not sure how this would fit, but it looks to be what you are looking for
orientation seems somewhat correct.

New Stainless Steel 1994-2005 Mazda Miata T25/T28 Turbo Outlet Elbow 2.5 inch | eBay

https://cimg9.ibsrv.net/gimg/www.mia...c5952dd101.jpg

It is a cast piece of metal. It is far above in quality what an exhaust shop will hack together. So of course it is expensive.

If he has the old style Begi log then the turbo is in exactly the same place.

It will not work. Look and the angle of the flange on the ebay piece compared to the FM piece.