NA 1.6: glowing manifold and turbo
09-28-2009, 08:34 PM
#1
Bannisheded
Thread Starter
iTrader: (33)
Join Date: Jan 2009
Location: San Jose, CA
Posts: 1,056
Total Cats: -3
NA 1.6: glowing manifold and turbo
Ever since getting my new motor in and driving around my mani and turbo glow lava red BUT ONLY after freeway driving.
Its a 1.6 with mspnp
From what i've read after searching for the syptoms it doesnt make sense
My timing is spot on, i checked it 3 times to make sure by pulling the #1 spark plug out and using a ratchet extension piece and watching when it becomes TDC so the timing marks line up and its spot on like i said.
All sensors are plugged in and reading.
My freeway cruising AFR's are good
And im pretty sure my ignition timing is set properly ( with Marc D's help)
Its weird though when we set the timing the timing mark went all the way to the left so its at like 18* 20*??wtf?
Right now i have the wastegate disconnected for the engine break in. The break in is complete now and i want to get this fixed before any serious tuning happens.
And if it matters the MS was street tuned with the wastegate disconnected so i could drive around to break the motor in.
Help please im completely stumped
Its a 1.6 with mspnp
From what i've read after searching for the syptoms it doesnt make sense
My timing is spot on, i checked it 3 times to make sure by pulling the #1 spark plug out and using a ratchet extension piece and watching when it becomes TDC so the timing marks line up and its spot on like i said.
All sensors are plugged in and reading.
My freeway cruising AFR's are good
And im pretty sure my ignition timing is set properly ( with Marc D's help)
Its weird though when we set the timing the timing mark went all the way to the left so its at like 18* 20*??wtf?
Right now i have the wastegate disconnected for the engine break in. The break in is complete now and i want to get this fixed before any serious tuning happens.
And if it matters the MS was street tuned with the wastegate disconnected so i could drive around to break the motor in.
Help please im completely stumped
Reply
0
0
09-28-2009, 08:39 PM
#2
Elite Member
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
My understanding is glowing red is from high EGTs. What kind of temps are you getting? I know you said your AFRs are good, but still. I have only seen my mani glow red once. I don't check on a regular basis either tho.
On a side note what kind of "engine break in" are you doing?
On a side note what kind of "engine break in" are you doing?
Reply
0
0
09-28-2009, 09:37 PM
#10
Bannisheded
Thread Starter
iTrader: (33)
Join Date: Jan 2009
Location: San Jose, CA
Posts: 1,056
Total Cats: -3
no cat lol
SOOOOOOO after reading what you guys suggested and talking to Marc my fixed timing was set at 10...?.....?. set it at -10 and it runs even better. will take it for a quick freeway run tonight to make sure that was it
SOOOOOOO after reading what you guys suggested and talking to Marc my fixed timing was set at 10...?.....?. set it at -10 and it runs even better. will take it for a quick freeway run tonight to make sure that was it
Reply
0
0
09-29-2009, 12:51 AM
#17
Elite Member
iTrader: (28)
Join Date: May 2008
Location: St. Augustine FL
Posts: 2,299
Total Cats: 2
^+1
On a serious note isn't that like one of the first things the mega manual says to do?
Or maybe it's brains sticky...... I don't remember.
Either way I'm glad you figured it out but damn read the basics.....
On a serious note isn't that like one of the first things the mega manual says to do?
Or maybe it's brains sticky...... I don't remember.
Either way I'm glad you figured it out but damn read the basics.....
Reply
0
0
09-29-2009, 01:21 AM
#18
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Glowing means you're driving under load, or making decent mpg; even your stock exhaust would glow if you ran it hard and popped the hood at night. My cast manifold glowed on the freeway at night, and so does my SS manifold...and no one here is running more advance than me. This is why we have water in the head...or the aluminium would sloop. Cast iron glows at 800*, SS glows even lower. The more I cried and worried about this initially, the more I realized that it was normal.
I now refuse to help newbs who don't read stickies on this ****.
I now refuse to help newbs who don't read stickies on this ****.
Reply
0
0
