Thinking narrower rad for air intake path ?
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Florida
Posts: 810
Total Cats: -6
Thinking narrower rad for air intake path ?
Sorry guys I did some searching but I'm confused ...
Current pipe curves out of the turbo to the front driver's side corner to a cone filter.
If I get a narrower radiator I should be able to extend the pipe somewhat forward behind the mouth.
I know people are using smaller radiators for other reasons.
What radiator can I use ?
Can the stock fans still be used ?
Thanks,
Poobs
Current pipe curves out of the turbo to the front driver's side corner to a cone filter.
If I get a narrower radiator I should be able to extend the pipe somewhat forward behind the mouth.
I know people are using smaller radiators for other reasons.
What radiator can I use ?
Can the stock fans still be used ?
Thanks,
Poobs
#13
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,179
Total Cats: 1,130
Yeah, I think he's asking for the filter only, he hasn't mentioned intercooler piping at all.
If you think its a good idea to do all this work and sacrifice cooling capacity for a CAI, yeah, not worth it.
If you think its a good idea to do all this work and sacrifice cooling capacity for a CAI, yeah, not worth it.
#14
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Florida
Posts: 810
Total Cats: -6
Ok, I'm bailing...
The above reasons are compelling.
I would like to reroute the piping to the turbo but not reroute the IC, move or angle the radiator etc.
Thank you all for your advice. It looked like a good project at the time.
The above reasons are compelling.
I would like to reroute the piping to the turbo but not reroute the IC, move or angle the radiator etc.
Thank you all for your advice. It looked like a good project at the time.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM