DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Is this downpipe worth using?

Old 10-18-2008, 02:59 AM
  #1  
Elite Member
Thread Starter
iTrader: (6)
 
kenzo42's Avatar
 
Join Date: Sep 2007
Location: CA
Posts: 2,016
Total Cats: 13
Default Is this downpipe worth using?

It has alot of rust pits. Not sure if it's worth using?

Name:  begi005.jpg
Views: 76
Size:  25.6 KB
kenzo42 is offline  
Old 10-18-2008, 03:40 AM
  #2  
VladiTuned
iTrader: (76)
 
18psi's Avatar
 
Join Date: Apr 2008
Posts: 35,821
Total Cats: 3,481
Default

clean it up with grinder then see
18psi is offline  
Old 10-18-2008, 08:37 AM
  #3  
Junior Member
iTrader: (4)
 
gompers's Avatar
 
Join Date: Sep 2007
Location: Hampton Roads, VA
Posts: 395
Total Cats: 0
Default

Originally Posted by 18psi
clean it up with grinder then see
+1


:
Its what's inside that counts
gompers is offline  
Old 10-18-2008, 10:19 AM
  #4  
Elite Member
iTrader: (8)
 
Toddcod's Avatar
 
Join Date: Oct 2007
Location: Dallas
Posts: 1,829
Total Cats: 0
Default

If you have a wire brush, it would be less invasive. Same principle. Then you can see if there are any holes.

Anyway, You already have it. Run it till it needs to be changed. It isn't that hard to take off. Get that dude together. lol.

But if you are about to buy it. I probably wouldn't.
Toddcod is offline  
Old 10-18-2008, 10:36 AM
  #5  
Elite Member
iTrader: (3)
 
Arkmage's Avatar
 
Join Date: May 2006
Location: Houston, TX
Posts: 2,895
Total Cats: 0
Default

sandblast it and ceramic coat it.... easy cheasy. unless it's rusted through there is no reason to not use it.
Arkmage is offline  
Old 10-18-2008, 12:08 PM
  #6  
Junior Member
 
fahrvergnugen's Avatar
 
Join Date: Sep 2008
Posts: 263
Total Cats: 0
Default

+1

Powder-coating for the win...
fahrvergnugen is offline  
Old 10-18-2008, 12:40 PM
  #7  
I'm Miserable!
iTrader: (5)
 
bryantaylor's Avatar
 
Join Date: Dec 2006
Location: jacksonville, fl
Posts: 1,711
Total Cats: -1
Default

spray paint it, install it, do a sweet burnout
bryantaylor is offline  
Old 10-18-2008, 02:04 PM
  #8  
Elite Member
iTrader: (13)
 
cueball1's Avatar
 
Join Date: Nov 2006
Location: Tigard, Oregon
Posts: 3,875
Total Cats: 2
Default

Wire wheel, rust remover or just sand it. Better yet see if any of the products that "kill" rust are OK for high temp applications. POR-15 is a sealer. Other products react with rust to stabilize it.
cueball1 is offline  
Old 10-18-2008, 03:33 PM
  #9  
Elite Member
iTrader: (8)
 
Toddcod's Avatar
 
Join Date: Oct 2007
Location: Dallas
Posts: 1,829
Total Cats: 0
Default

There is this stuff at Oreilly's, When you wipe it accross the rust it causes a chemical reaction and turns the rust into magnesium. The 914 Porsche community swears by it.
Don't take the rust off. Just brush this liquid over it.

I had forgot about the stuff. Good Luck!
Toddcod is offline  
Old 10-18-2008, 03:49 PM
  #10  
Elite Member
iTrader: (24)
 
kotomile's Avatar
 
Join Date: Oct 2006
Location: Monterey, CA
Posts: 7,537
Total Cats: 42
Default

You should look at most OE exhausts that are a few years old, you can't see any metal for the rust encasing it. So, I say use the thing. If you really want to see if the little rust spots are too far gone, poke them with something. If it goes through, well, there you have it.

Originally Posted by Toddcod
There is this stuff at Oreilly's, When you wipe it accross the rust it causes a chemical reaction and turns the rust into magnesium.
Um, it takes a compound consisting of 2 parts Iron and 3 parts Oxygen and somehow turns it into Magnesium?

I don't doubt the stuff works, but I think how it works may have been explained to you wrong.
kotomile is offline  
Old 10-19-2008, 01:42 AM
  #11  
Elite Member
iTrader: (8)
 
Toddcod's Avatar
 
Join Date: Oct 2007
Location: Dallas
Posts: 1,829
Total Cats: 0
Default

I don't doubt the stuff works, but I think how it works may have been explained to you wrong.[/QUOTE]

I've never used the stuff. But when I had my 914, I was going too.
Everyone over there loved it. I think it was like $30.00 a gallon though. They had a big write up about it. But I never read the label it's self. I sold the porsche, problem solved. Lol
Toddcod is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
84
04-12-2021 04:21 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
Goldwar
DIY Turbo Discussion
2
09-29-2015 09:20 AM
Miatabro
Meet and Greet
7
09-11-2015 12:13 PM


Thread Tools
Search this Thread
Quick Reply: Is this downpipe worth using?



All times are GMT -4. The time now is 09:49 AM.