quick one
 

ok really easy. . . . .
T3 turbo, BEGI mani & DP, EMB, 305'S, Oil lines. Is this enough for a DIY/greddy replica or will i still need a afpr. Sorry searched for the answere but it all came back mixed.

What boost level are you plannin on running? I am going to guess that the 305s at stock fuel pressures are going to max out between 4 and 6 psi

Right now yeah about 5 psi, later i want to move up but right now thats it. I dont have to use the 305 either right, or should i?

I dont know much about EMB, other than its the most basic of the Greddy Emanage Series. We have an e-manage section on the forum and I think its in your best interest to spend some time there and get a good understanding of what you have to work with as well as what others have done or are doing.

NO, you don't HAVE to run 305's... I'm not sure what the upper limit of EMB is on injectors, but I know guys run up to 460's... if you search and find dudes running 550's, that would be your best bet for overhead and future growth. There is an Emanage forum, I'd start there.

I'd also plumb in your BOV now just in case you get a boost spike somewhere down the line you don't hurt your turbo.

you should be fine

305s with the EMB should be good for 6-7psi

Sweet thanks, so i take it when i want to move the power up a little i will start with afpr and fuel pump. I mean for fueling that is.

you could get away with no fuel pump and just the fmu. pumping to 70psi would give you a lot of room to grow.

is r kelly really your uncle? Cause if hes not i dont get it.

No he is not before the all the avatars went away i had a calvin character mith a mazda shirt on pissing on a Honda emblem. Your right its pretty stupid with out the avatar.

Haha I like it. Put it in your sig.