3sgte into a 1990 miata
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: bay area,California
Posts: 79
Total Cats: 0
3sgte into a 1990 miata
who has done this ,any info. i just saw a rb26det into a 1990 miata, sick as hell.. i have mr2 with 2.2 stroker love it, but in the future i want to make a 3sgte 500whp miata.
#3
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
take some measurements. and I forget which way the 3s rotates but you might want to check that too.
then go out and find an old altezza/IS or supra transmission and see if it'll fit under the car.
then go out and find an old altezza/IS or supra transmission and see if it'll fit under the car.
#9
This to me is one of those things that sounds awesome until about 4 months into the project when you still dont have a running stock sub 250hp 3sgte in there and you have spent 2x as much as it would take to build a 1.8 and turbo it. If you insist on swapping in a factory turbo 4cyl the sr20 is a better option, unlike the 3s the sr20 is all aluminum, not to mention there is a mount kit available and the swap has been done numerous times. In my opinion even the sr20 is a waste. B6, BP, F20/22c and lsx engines are the only power plants that are worth using in a miata in my opinion. To each his own though and no matter the engine a 500whp miata is sure to be a hand full.
#10
Junior Member
Thread Starter
Join Date: Apr 2006
Location: bay area,California
Posts: 79
Total Cats: 0
my old engine on current car was 364whp, before heat soaking ,my new 3sgte(98 bottom,fixed water pump area,where they always crack) motor is built and e85 ready looking for 500-600whp, 500whp i will be happy , this setup is for track, yeah i still love that little car yes the miata,my wife loves it also.
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM