SR20 T25 Wastegate options
What are my options for mounting a wastegate to a T25 SR20 Turbo. Also if anyone has one (wastegate actuator) for sale please let me know i am in need of one
|
I will have one from a GT2554R (T25) in a week. Brand new
|
I was able to use the wastegate actuator that came on the turbo, just had to redrill the holes on the mounting bracket, and then bend the rod.
|
keinayo how much for the actuator and mounting bracket?
Also, im gunna plug my need for a mani/dp for this turbo and a 1.8l anyone have for sale? |
Okay well he no longer has it. Does anyone know where to buy a wastegate/bracket for this turbo that i can modify to work?
|
|
are you going to clock your turbo?if you are NO thats a stock 2560 wastegate.
they use it on there older kits with the over the top piping...check atpturbo.com then email wideopenthrottle(member) for pricing. |
What wastegate should i be looking for if i clock the turbo?
|
http://www.atpturbo.com/Merchant2/me...egory_Code=WGT
is this the one im looking for? |
When clocking the turbo a new base plate needs to be made or the existing baseplate needs to be modified. I wouldn't know exactly how far you needed to go until i seen a pic or held it in my hand though.
|
I plan to drill/tap new holes in the turbine for the bracket.
|
Then just find a flat spot and be carefull not to poke through that would suck. you might get away with just bending the bracket you get vs making a new one.
|
Originally Posted by Dow.tom
(Post 119874)
I plan to drill/tap new holes in the turbine for the bracket.
You plan to drill/tap new holes in the COMPRESSOR HOUSING for the bracket. |
that's what i meant, the CHRA?
|
All times are GMT -4. The time now is 09:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands