Stupid Q about compressor seal
1 Attachment(s)
So I've seen many turbo's with a seal between two parts of the compressor housing. As in where you would loosen the bolts to clock the compressor housing.
I know it's a bad picture, but this is what im talking about: Attachment 200981 Anywho, my ebay turbo has no seal, and I was wondering if anyone else running theirs with no seal, or if they sealed it and realized it was leaking before. I was thinking of putting maybe a thin layer of RTV or finding a seal to go there, but wasn't sure if it was necessary. I just hate the idea of thinking I could be leaking air out between the housing. |
In my turbo there are 2 O-rings there, large and larger.
|
don't worry about it. it's the compressor o-ring and it's usually a worthless paper seal, some rtv will work but I never use anything.
|
Originally Posted by Braineack
(Post 512636)
don't worry about it. it's the compressor o-ring and it's usually a worthless paper
seal, some rtv will work but I never use anything. |
All times are GMT -4. The time now is 05:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands