Subaru style Gauge pod
#1
Subaru style Gauge pod
Hello, I have searched without finding anything, but I was wondering if anyone had done a subaru style gauge pod set up on the top of the dashboard in the center slightly facing the driver? I am not a fan of the A-Pillar gauges and would like to keep my radio as well as have maximum visibility of the gauges. I was thinking of using a pod like this:
3 Hole POD Dash Triple Gauge Tacho Temp OIL Meter Panel Mount Holder 52mm Black | eBay
Any thoughts or reasons why it wouldn't work?
3 Hole POD Dash Triple Gauge Tacho Temp OIL Meter Panel Mount Holder 52mm Black | eBay
Any thoughts or reasons why it wouldn't work?
#3
How would they block the tach and speedo, im talking about center dash top mounted above the radio on dashboard like this:
http://www.streettuned.com.au/images...r%20XT%201.jpg
http://www.streettuned.com.au/images...r%20XT%201.jpg
#4
I have one of the genuine Subaru ones (at least I think it's genuine) and I was contemplating trying it out.
I don't really like the a-pillar one either, but I'm not sure how the suby one will fit on/in the miata dash.
I've been planning on test fitting mine, but it's been pretty low on the "to-do" list.
I don't really like the a-pillar one either, but I'm not sure how the suby one will fit on/in the miata dash.
I've been planning on test fitting mine, but it's been pretty low on the "to-do" list.
#6
How would they block the tach and speedo, im talking about center dash top mounted above the radio on dashboard like this:
http://www.streettuned.com.au/images...r%20XT%201.jpg
http://www.streettuned.com.au/images...r%20XT%201.jpg
The Miata dash isn't as flat as it looks.
#11
No Prob. The one I posted is a DDMworks radio kit --->
DDMWorks Miata Radio Surrounds...
It's ~$100 new but I picked up mine for $50 shipped from the FS section here. One pops up every now and again on here if you keep your eye's peeled.
DDMWorks Miata Radio Surrounds...
It's ~$100 new but I picked up mine for $50 shipped from the FS section here. One pops up every now and again on here if you keep your eye's peeled.
#12
The gauge pods in the tombstone are too low to be useful for track driving... and the A-pillar mounts block your view in left hand corners (pulled mine out for that reason). I like the idea of a Subaru style gauge pod with the gauges up level with the OEM instruments but it's a "DIY" deal from what I can find. No one makes one...
#13
The gauge pods in the tombstone are too low to be useful for track driving... and the A-pillar mounts block your view in left hand corners (pulled mine out for that reason). I like the idea of a Subaru style gauge pod with the gauges up level with the OEM instruments but it's a "DIY" deal from what I can find. No one makes one...
#16
All I can tell you is if it doesn't block your view into left hand corners on track you sit a lot differently in the car than I do. One of our local tracks has a long left hander about 190-200 degrees and the dual gauge pod totally blocked my view going into the corner.
YMMV...
YMMV...
#17
Maybe I'm just used to not seeing out of that corner because of my inspection sticker.... I payed attention to it this morning on my way into work and it does block a tiny bit of my view in that corner but not enough to affect my view of where I need to look.. Who knows lol
#18
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
All I can tell you is if it doesn't block your view into left hand corners on track you sit a lot differently in the car than I do. One of our local tracks has a long left hander about 190-200 degrees and the dual gauge pod totally blocked my view going into the corner.
YMMV...
YMMV...
I tried the radio area and never looked at the gauges. Then I screwed four gauges into the top of the gauge hood, two on each side, which worked until they all broke off (brittle plastic).
I finally gave up and went to a triple-gauge pod on the a-pillar. Wideband low, then boost, then oil temp. It was the best combination of function (I always kept my vents) and visibility I could come up with.
#19
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
I also had a 2 gauge pod for a while in the NB. I ended up pulling it out because it was too visible from outside the car. If the gauges were set lower it wouldn't be so bad, but it just screamed at me every time I looked at the car.
#20
Ive been running an Autometer pod for a 94-04 Mustang. It took a little sanding work to get it to match the contour of the dash but it puts two gauges just a glance away. It matches the factory gauge hood pretty well too. I run oil temp and EGT in it. I have boost and AFR in the vent just below since I have safeguards in my MS3 that keep an eye on those. The only picture I have right now is in the stages of my build...