Need ideas mounting IWG actuator
#1
Need ideas mounting IWG actuator
All,
I have a GT2860RS, FM manifold, and TDR i/c which requires the compressor outlet to point up.
I need ideas mounting the (internal) wastegate actuator, short of fabbing a custom bracket. (Or ideas how to do that easily).
The compressor outlet is in the way, and the canister needs to be mounted at an angle. There are 2 possible positions for the can:
1) far away and low ... a straight actuator rod will work, and I just need an extension from ATP turbo (local). I prefer this option but bracket will be more difficult to fab.
2) closer but high ... actuator rod needs to bend down towards flapper valve which means $80+ for an actuator with a bent arm ... actuator can needs to sit at a pretty sharp angle i.e. its rod axis is not parallel to turbo shaft
Photos of both positions below.
I have a GT2860RS, FM manifold, and TDR i/c which requires the compressor outlet to point up.
I need ideas mounting the (internal) wastegate actuator, short of fabbing a custom bracket. (Or ideas how to do that easily).
The compressor outlet is in the way, and the canister needs to be mounted at an angle. There are 2 possible positions for the can:
1) far away and low ... a straight actuator rod will work, and I just need an extension from ATP turbo (local). I prefer this option but bracket will be more difficult to fab.
2) closer but high ... actuator rod needs to bend down towards flapper valve which means $80+ for an actuator with a bent arm ... actuator can needs to sit at a pretty sharp angle i.e. its rod axis is not parallel to turbo shaft
Photos of both positions below.
#3
impossible without either custom bracket or welding on mounts to the compressor cover
see here:
https://www.miataturbo.net/build-thr...6/#post1184810
see here:
https://www.miataturbo.net/build-thr...6/#post1184810
#7
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
i was looking for something more like this for cheaper:
ATP Wgt 027 Wastegate Bracket for GT25R GT2554R Turbo | eBay
that should be able to mount it just like this:
I dont see any problem with that angle whatsoever.
but you might need to fab something to mount the way i illustrated, i think this one mounts differently on teh front of the compressor, not the rear plates that hold the housing to the backing plate.
need to find this one:
maybe FM or Begi has old stock of them from really early kits?
ATP Wgt 027 Wastegate Bracket for GT25R GT2554R Turbo | eBay
that should be able to mount it just like this:
I dont see any problem with that angle whatsoever.
but you might need to fab something to mount the way i illustrated, i think this one mounts differently on teh front of the compressor, not the rear plates that hold the housing to the backing plate.
need to find this one:
maybe FM or Begi has old stock of them from really early kits?
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM