TB25/TB28 downpipe options
 

Anyone know of a downpipe that directly fits the chinacharger TB25/TB28? Its for my Mazdaspeed protege but it looks like this is the only forum I can find where people are using the TB25/28's Its a 5 bolt flange but non standard.

just T28\t25 no b
Also looking on here for a downpipe that fits your car won't go well as your is a fwd setup vs our rwd. Best idea is to get a flange for it and j or u bend and friend or shop to weld it together.

Try looking at Civic turbo ones on Ebay, I think it is the right flange, You will just need to chop and weld it a bit.

(look first though, Don't buy it off of my suggestion) :)

Can't find one by itself but here is one in a kit

http://cgi.ebay.com/ebaymotors/Honda...Q5fAccessories

As Above... I would just get a gasket that fits take it to some engineering place and get a flange cut out, you can probably get them to bake you up the bends etc too then just cut and tack the whole lot together, take it back to said engineering place to get welded up :)

If not depends where you are but there is someone on here called Art tech (I think) that may be able to make one for you, might be worth a search / message.

Just get it fabbed up. A lot of the china chargers now have a unique 5 bolt downpipe flange, and they include it in the sale.

I have a TB25 with a flange different to the standard T25 - 28 Nissan 5 bolts.
This is the flange I bought for mine:

http://cgi.ebay.com/ebaymotors/TB28-...item1e5cc870cd

Hope it will help.
So long.
Ben.