TD04h-15G oil lines questions.
Im preparing for my installation of my greddy turbo kit (td04h-15g) that should arrive anytime soon.
First, does the turbo needs a restrictor on the oil feed line? my guess is .060'' Second, I'm also looking for a correct banjo fitting for the feed on the turbo. Is it M10 x 1.25 to -4AN that I should get??? http://www.ebay.com/itm/M10x1-25-Tur...item3a6efcd675 Is that a good part to use considering I will not use the three way splitter at the hose beginning?? -I have actually -4AN oil line that connects to the oil port next to the dipstick with a M10 x1.5 to -4AN fitting. thanks for the upcoming answers, soooo looking forward to boost. |
No oil restrictor required (journal bearing turbo).
Kit comes with adequate oil feed line. Do you not have the line from the kit? |
NO, no lines were included in the kit, I bought a clean low millage used greddy kit customized to get better results out of it. tony turbo downpipe, fmic...
I just want to confirm the information: -Is the oil feed fitting on the TD04H-15G turbo is M10x1.25, yes or no... |
|
All times are GMT -4. The time now is 01:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands