503

iTrader: (1)

Not to beat a dead horse (couldnt find a similar thread) but I am trying to figure out a intercooler setup.

Car will be autox'd, mostly street. Has a gt2554r. I am looking at the Fab9 IC, a Frozenboost liquid to air IC kit, and the CXRacing.

I want good performance, but is spending the extra for the Fab9 worth it on these engines with that small of a turbo?

Ive never done a liquid to air, but Ive been considering it if for nothing else than the cool factor... Are they worth the headache? Ive seen a few L/A setups on here

gesso

iTrader: (1)

What level of boost will you be running. That 2554 will be a blow dryer (read lots of hot air) at anything over 12 or so psi.

​​​​​​Mt.net answer, get a precision core IC

Savington

iTrader: (31)

Trackspeed 350hp Intercooler

I did a lot of IC testing developing this one. The Precision core is a big step above the Vibrant (Fab9) or CXRacing cores.

Air/water setups are done for packaging reasons almost exclusively. We don't have the packaging constraints that would require a W/A setup.

Arca_ex

iTrader: (2)

Buy the Trackspeed unit and be done with it.

DNMakinson

iTrader: (3)

http://https://www.ebay.com/p/Univer...83410352&rt=nc

You will need to weld mounts. 2”’inlet and outlet is convenient.

Seriously, I have used this IC with great results with very long uphill pulls in the 175 HP range. Less than 20 Degrees F over ambient.

503

iTrader: (1)

The Precision will be noticeably better? I can pay the $400 if it will be, but $260 with brackets is easier to swallow from Fab9, put a lot of money into my car this month

18psi

iTrader: (76)

ryansmoneypit

iTrader: (6)

Anything with a Precision core.

503

iTrader: (1)

Hey lol, never turbocharged anything before this is a learning experience

18psi

iTrader: (76)

Nothing wrong with that. start reading

503

iTrader: (1)

Just seeing people that swear by the CX, others are saying the Fab9 works great and is a huge upgrade over the CX, and you guys are saying the Precision cored stuff - if it really will be a large difference in IAT that will result in gains on hot summer days, I can spend the extra... But the price difference is enough for the intercooler piping or a nice BOV, so I don't want to go overboard/overkill if I don't really need to, especially considering I still have stock internals and I am debating starting another car project before building this engine

ryansmoneypit

iTrader: (6)

It just needs to be a precision core.

Joker

iTrader: (1)

Sav - Whats the weight for this IC?

yossi126

iTrader: (6)

Savington

iTrader: (31)

Having looked at the Vibrant (fab9) cores in person, and tested a better Treadstone core myself, I can confidently say that the Precision core will be far better. You will see consistently lower IATs and less pressure drop across the core. I am obviously biased, but as an enthusiast who's built a few cars for himself and several others for customers, it's always cheaper to buy the right parts the first time.

10.5lbs with our brackets

Meh. I have a Treadstone core on the shelf left over from our testing.

10 seconds on the science of heat exchangers: Turbulent air will transfer heat much better than smooth air (laminar flow). Anything you can do to disrupt the airflow as it passes through the core will increase the amount of heat that you can pull from that air. Google for more info beyond that.

One of the things that good intercooler cores have is louvered internal fins. These louvers disrupt the airflow through the core substantially, which increases heat transfer.

No pic of the Vibrant (Fab9) core from me, but AFAIK it has no fins or louvers inside.

Treadstone core. Very open, no louvers at all. The core is not straight through, it offsets every 10mm or so, but that's a cheap half-measure. It's also how Treadstone (a fairly small company) can build an intercooler that competes on price with Precision (a much bigger company). We actually use a lot of Treadstone stuff in our turbo kits (DP clamps, flex bellows, silicone IC couplers), but their IC cores were a little disappointing. Not awful, just not as good as they could be.

Treadstone 18x12 raw core:


Precision core. Tons of louvers here. The inlet is centered on the core so there's also no need for an air divider like Treadstone uses.

Precision 350hp assembled core:


Every time I'm at SEMA or PRI I make a point of looking at everyone's intercooler cores. Garrett makes the nicest stuff, but you pay for it. Precision is a close second at less than half the price. Hence our decision to build around their core.

18psi

iTrader: (76)

supposedly the newer larger vibrants have proper turbulator placement, but I've yet to see one in person

90LowNSlo

If you can get the precision cooler do so. I have the CX Racing IC and just looking at the pics the precision has it beat. Looking at the data it's no contest. CX Racing IC is amazing for the price because it is so cheap. It's adequate for a street build or low power build that's all though... adequate.

Braineack

iTrader: (62)

rocks love them too.

x_25

There are ebay cores with the louvers out there. I have one in my car. You have to trawl for one with pictures that show the core, and then hope you don't get sent something different. The build quality is meh though. But I am ok with the trade off for price/performance since I am not building a car that is pushing any limits.

acedeuce802

iTrader: (1)

After all this discussion, he still went with Fab9.