7 Attachment(s)
replaced the BOV because it was fluttering..but again..to shiny..so blacked out it is
https://www.miataturbo.net/attachmen...ine=1412793969 https://www.miataturbo.net/attachmen...ine=1412793969 https://www.miataturbo.net/attachmen...ine=1412793969 cleaned the wheels with oven cleaner....i could not believe my eyes...grime just basically fell off https://www.miataturbo.net/attachmen...ine=1412793969 https://www.miataturbo.net/attachmen...ine=1412793969 day pic https://www.miataturbo.net/attachmen...ine=1412793969 moved out into a new house..with a garage :) first thing to move in was the baby https://www.miataturbo.net/attachmen...ine=1412793969 new torsen...i heard is a pain to install but i've done worse.... https://www.miataturbo.net/attachmen...ine=1412793969 |
8 Attachment(s)
some updates:
decided that if i was ever going to go on a long trip, i should have a radio. so i installed an AMP https://www.miataturbo.net/attachmen...ine=1417035207 swapped suspension from NA to NB with tophats. it raised the car quiet a bit but it rides so much better on non-blown shocks https://www.miataturbo.net/attachmen...ine=1417035207 https://www.miataturbo.net/attachmen...ine=1417035207 removed the plastic lining on the doors and cleaned the goo https://www.miataturbo.net/attachmen...ine=1417035207 proof that the car is not always parked: https://www.miataturbo.net/attachmen...ine=1417035207 500 miles on the break in https://www.miataturbo.net/attachmen...ine=1417035207 further cleaning the wheels https://www.miataturbo.net/attachmen...ine=1417035207 https://www.miataturbo.net/attachmen...ine=1417035207 |
3 Attachment(s)
wasn't happy with my control plate and the loctaion of the start button
so switched things a bit https://www.miataturbo.net/attachmen...ine=1417035229 https://www.miataturbo.net/attachmen...ine=1417035229 https://www.miataturbo.net/attachmen...ine=1417035229 |
4 Attachment(s)
windows would be really slow coming down and going up. figured they needed cleaning
https://www.miataturbo.net/attachmen...ine=1417035244 the guides were gone, so i went i bought some of the spacers to fix it https://www.miataturbo.net/attachmen...ine=1417035244 assembled spacer: https://www.miataturbo.net/attachmen...ine=1417035244 rmeoved the stupid tinted window as well https://www.miataturbo.net/attachmen...ine=1417035244 small video of how the siwtches work http://i1177.photobucket.com/albums/...ps0ufaqu7k.mp4 |
9 Attachment(s)
decided to roll back the miles to match my engine break in miles.
don't worry, i wrote down the current mileage somehwre safe :) small step by step remove cluster remove cluster clear plastic (has to come off with black bezel) remove 4 screws holding the gauge (two are big, two small) rmeove the niddle rmeove the trip numbers remove the rod keeping the plastic tabs from turning with a flat head, bend back where the middle rod is being held. somehow rmeove the al the numbers play around with them until you figure out how to turn them back. it took me a min but i figure dit out..just too hard to explain. put back together. https://www.miataturbo.net/attachmen...ine=1417553598 https://www.miataturbo.net/attachmen...ine=1417553598 https://www.miataturbo.net/attachmen...ine=1417553598 https://www.miataturbo.net/attachmen...ine=1417553598 https://www.miataturbo.net/attachmen...ine=1417553598 https://www.miataturbo.net/attachmen...ine=1417553598 https://www.miataturbo.net/attachmen...ine=1417553598 https://www.miataturbo.net/attachmen...ine=1417553598 https://www.miataturbo.net/attachmen...ine=1417553598 |
2 Attachment(s)
taking her out for a spin..
https://www.miataturbo.net/attachmen...ine=1417553619 https://www.miataturbo.net/attachmen...ine=1417553619 |
6 Attachment(s)
time to build a heatshield
being that i am so ****ing cheap and love DYI, i decided to do the license plate mod. https://www.miataturbo.net/attachmen...ine=1417553698 final product https://www.miataturbo.net/attachmen...ine=1417553698 then, fuel pump failure. doesn't turn on https://www.miataturbo.net/attachmen...ine=1417553698 turne dout to be wiring issue. the plug overheated and stopped making a connetcion. thank god for AAA, otherwise it would've been a dumb expensive mistake. you can not see it, bu the RED on the left connector wa smelted inside. https://www.miataturbo.net/attachmen...ine=1417553698 fixed that and got my pressure back up...plus my blood pressure down https://www.miataturbo.net/attachmen...ine=1417553698 has a random awesome guy make me a shiftknob. just gotta figure out a way to make it weighted, looks cool tho..actually..looks awesome https://www.miataturbo.net/attachmen...ine=1417553698 |
Isn't ODO rollback, um, highly illegal?
Originally Posted by Alejo_NIN
(Post 1186541)
has a random awesome guy make me a shiftknob.
just gotta figure out a way to make it weighted, looks cool tho..actually..looks awesome |
only illegal if:
1. i sell the car and claim it has 1000 miles. 2. i sell the car and state it has less miles than it does. i wrote down the actual mileage in the cluster so if you remove it you'll be able to add both and get actual chassis mileage. i also highly doubt anyone will believe me when i say my car has 1000 miles ;)
Originally Posted by EO2K
(Post 1186623)
Isn't ODO rollback, um, highly illegal?
Depleted uranium maybe? Heh, neat knob though. I wish I had access to a lathe and the time to do that kind of stuff. |
Its not illegal in Texas if the car milage is labeled EXEMPT which most if not all NA miatas here are because of age.
|
Originally Posted by ScottyP3821
(Post 1186813)
Its not illegal in Texas if the car milage is labeled EXEMPT which most if not all NA miatas here are because of age.
|
Thanks guhys, I appreciate the edumication. Note to self: Do not trust mileage on cars that have been registered in FL and TX :giggle:
|
In TX always always always get a leak down or at least a compression test before buying a car.
|
Many states work the same way... Over something like 10 years old in TN, the mileage is marked EXEMPT (or similar) when you transfer the title for a sale. This applies even if the mileage is known to be accurate on the speedometer.
|
7 Attachment(s)
tackling my fuel issue, i decided to rewire the pump with thicker wire.
this is the wire that took a crap: https://www.miataturbo.net/attachmen...ine=1418079184 the blue wire is what will be replacing Stock: 16AWG New: 12AWG :) drilled two holes to pass the wires through. i will be installing little grommets to protect the wire https://www.miataturbo.net/attachmen...ine=1418079184 the grommets: https://www.miataturbo.net/attachmen...ine=1418079184 since the wire wasn't thick enough to fill the hole and i dind't want to use any kind of glue or epoxy, i opted to wrap a piece of heatwrap around the cable to make it thicker. i should'vd gone for smaller grommets or thicker wire but this is what i had to work with so whatever https://www.miataturbo.net/attachmen...ine=1418079184 https://www.miataturbo.net/attachmen...ine=1418079184 https://www.miataturbo.net/attachmen...ine=1418079184 i opted to install these butt connectors. i kept them this way as to never be able to connect them backwards https://www.miataturbo.net/attachmen...ine=1418079184 |
3 Attachment(s)
|
10 Attachment(s)
hanging out with a friend's boosted NB with the mazdaspeed setup
https://www.miataturbo.net/attachmen...ine=1418666342 decided to wrap the switchboard in black vinyl https://www.miataturbo.net/attachmen...ine=1418666342 this is my idea for the doors. i won't be installing door cards but i want the armrest i will be painting it black as well as the inside of the door black. https://www.miataturbo.net/attachmen...ine=1418666342 the limited slip install crusade https://www.miataturbo.net/attachmen...ine=1418666342 https://www.miataturbo.net/attachmen...ine=1418666342 https://www.miataturbo.net/attachmen...ine=1418666342 https://www.miataturbo.net/attachmen...ine=1418666342 https://www.miataturbo.net/attachmen...ine=1418666342 cleaning the bolts https://www.miataturbo.net/attachmen...ine=1418666342 playing with backlash and understanding how it works https://www.miataturbo.net/attachmen...ine=1418666342 |
5 Attachment(s)
finally finished my torsen install and out i went.
paid version of MS to help me tune! https://www.miataturbo.net/attachmen...ine=1420767898 fixed the door cards and cleaned them up a bit. wrapped the black arm rest in vinyl https://www.miataturbo.net/attachmen...ine=1420767898 https://www.miataturbo.net/attachmen...ine=1420767898 https://www.miataturbo.net/attachmen...ine=1420767898 then went out for a drive https://www.miataturbo.net/attachmen...ine=1420767898 |
3 Attachment(s)
|
I never noticed that AEM has that little photo resister in the gauge. I guess thats how it dims the gauge at night. thats neat.
|
6 Attachment(s)
small update for those who still follow:"
installed the eclipse vents sinc ei moved the AEM from the vent to the cluster https://www.miataturbo.net/attachmen...ine=1423587315 finally hooked up my EBC and started tuning boost. i'm steady at 15PSI https://www.miataturbo.net/attachmen...ine=1423587315 then blew a pipe off at 20PSI :P https://www.miataturbo.net/attachmen...ine=1423587315 https://www.miataturbo.net/attachmen...ine=1423587315 more miata love https://www.miataturbo.net/attachmen...ine=1423587315 some miata hate https://www.miataturbo.net/attachmen...ine=1423587315 |
Originally Posted by Alejo_NIN
(Post 1204672)
installed the eclipse vents sinc ei moved the AEM from the vent to the cluster
https://www.miataturbo.net/attachmen...ine=1423587315 Also, loving that gauge in the cluster. I may need to rethink my gauge situation. Good jorb man! :bigtu:
Originally Posted by Alejo_NIN
(Post 1204672)
then blew a pipe off at 20PSI :P
|
3rd gen eclipse...not the round one from F&F, but the one after...the ones that never came turbo.
|
I know absolutely nothing about the eclipse, but that gives me somewhere to start. Thanks!
|
4 Attachment(s)
some more updates.
veyr close to finishing my NB interior swap https://www.miataturbo.net/attachmen...ine=1425937778 https://www.miataturbo.net/attachmen...ine=1425937778 got a set of wheels https://www.miataturbo.net/attachmen...ine=1425937778 https://www.miataturbo.net/attachmen...ine=1425937778 should look good on the miata :) |
get a bead around that pipe or it will keep blowing
|
i tightened it, and it hasn't blown off...so far so good :)
|
9 Attachment(s)
for those who are still watching :)
this will be a chronological update. After i got the wheels, i mounted two in the back to see fitment. they fit...with lots of room for more. https://www.miataturbo.net/attachmen...ine=1429195317 found a slammed miata...my baby looks so big https://www.miataturbo.net/attachmen...ine=1429195317 purchased Nitto NeoGens cheapest tire i could find better than nankangs https://www.miataturbo.net/attachmen...ine=1429195317 oil fitting broke again (2nd time) https://www.miataturbo.net/attachmen...ine=1429195317 https://www.miataturbo.net/attachmen...ine=1429195317 https://www.miataturbo.net/attachmen...ine=1429195317 https://www.miataturbo.net/attachmen...ine=1429195317 https://www.miataturbo.net/attachmen...ine=1429195317 fitting tires to get replaced https://www.miataturbo.net/attachmen...ine=1429195317[/QUOTE] |
3 Attachment(s)
|
7 Attachment(s)
finally blew turbo due to oil starvation due to AGAIN 3rd time broken the same fitting
https://www.miataturbo.net/attachmen...ine=1429195365' https://www.miataturbo.net/attachmen...ine=1429195365 https://www.miataturbo.net/attachmen...ine=1429195365 https://www.miataturbo.net/attachmen...ine=1429195365 godspeed https://www.miataturbo.net/attachmen...ine=1429195365 https://www.miataturbo.net/attachmen...ine=1429195365 https://www.miataturbo.net/attachmen...ine=1429195365[/QUOTE] |
3 Attachment(s)
turbo blew right before an schedule auto-x
but was able to fix it just in time Attachment 184183 https://www.miataturbo.net/attachmen...ine=1429195384 https://www.miataturbo.net/attachmen...ine=1429195384[/QUOTE] |
5 Attachment(s)
and fitting BROKE again...wtf? am i retarded?
https://www.miataturbo.net/attachmen...ine=1429195400 https://www.miataturbo.net/attachmen...ine=1429195400 finally went ahead and removed everything and instaled this instead https://www.miataturbo.net/attachmen...ine=1429195400 https://www.miataturbo.net/attachmen...ine=1429195400 then relocated the sensor further down the line https://www.miataturbo.net/attachmen...ine=1429195400[/QUOTE] |
All times are GMT -4. The time now is 11:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands