|
Yes, WTF are camber clips? Also, when you say your camber is "near perfect," what do you mean?
And, again, what kind of differential do you currently have? |
Originally Posted by y8s
(Post 77694)
:td::td::td::td::td:
I can break my stock 01 loose in 1st or 2nd all day long. I do it instead of honking when someone irritates me on the road. car's ass just slowly slides sideways. and yes, it does require a few rpm. maybe his rear shocks are set too stiff. well yeah I can go through all the gears in my altima spinning the tires if i want. I'm just saying, how the heck do you guys drive that you are losing traction so bad? If your dumping from 6k and cant hook up, dont do it. |
Originally Posted by jasono718
(Post 77643)
you guys are funny..hahhaha...didnt get to finish my post due to being at work and my break ending... i dont spin the tires in 4th until about 12psi... for suspension i have kyb agx...fm springs..racing beat front and rear lower control braces...fm butterfly and rails...fm full bushing kit...konig helium in gold with falken 615s 205 50 15.. camber clips.. im sure there is something else i havent mentioned... camber is near perfect
act 1.8 hd clutch.. 1.8 lightned flywheel.. ps yes it was cold.. but i had driven for about 15 miles on the highway.. the tires should have been hot by then..i hope... the real problem is that now that i have this power i cant really take off as fast as i want to...not that the car is out of control...its just i want to go faster... |
Originally Posted by jasono718
(Post 77643)
you guys are funny..hahhaha...didnt get to finish my post due to being at work and my break ending... i dont spin the tires in 4th until about 12psi... for suspension i have kyb agx...fm springs..racing beat front and rear lower control braces...fm butterfly and rails...fm full bushing kit...konig helium in gold with falken 615s 205 50 15.. camber clips.. im sure there is something else i havent mentioned... camber is near perfect
act 1.8 hd clutch.. 1.8 lightned flywheel.. ps yes it was cold.. but i had driven for about 15 miles on the highway.. the tires should have been hot by then..i hope... the real problem is that now that i have this power i cant really take off as fast as i want to...not that the car is out of control...its just i want to go faster... |
Lol, i can spin first, and second if its really cold.
I remember right when i got my turbo in, it was about 5 deg. and i hit second and lit em up. But lately its been warmer, and instead of spinning tires, i slip my clutch =(. Oh well, haha. |
Hmm, I only get traction problems in 2nd at 17-18 psi and then only when it is cold out. I just hit 5000 rpms and the tires go up in smoke. It's fun to buslength people while doing a rolling burnout, but I'd rather hook and go.
|
You know what I think... Your clutch is slipping: it smells bad and you aren't going anywhere, so you blamed the tyres! :gay:
'less it's got V-TEC yo! :D |
I know that in the rain, with studded snow tires, I will semi-frequently inadvertently spin the tires just by rolling on the throttle in third. Thats only because studded tires are worthless in the rain.
Its a good thing the miata is such a well mannered easy to drive car. |
I'd have to disagree about well mannered, it was a downpore one day and I was easing the throttle but also trying to get out of someone's way and spun it like a top down the road. fortunately it went straight and I regained control after sliding in beside a mail box on the shoulder. However with my new tires I can only get them to slip in wet weather while in reverse. On a stock miata that is.
|
I can break my tires loose in 4th gear on my other car. Its no problem really. Completely built drivetrain, and its only putting down 335 whp. So maybe its easier when your car is powered by BS?
|
:gay: This thread is great! :gay:
I would love to see a 4th gear spin@6psi! PLEASE post a video! |
Why can't people leave vtec alone... my turbo beater has it... it helps me get good gas mileage :p
<-- closet honda addict. |
it might have to do with the stigma surrounding it- like the cavalier I saw yesterday with a vtec decal across the windshied? :gay: I wished my engine was as capable. But then again it's way cheaper.
|
Originally Posted by m2cupcar
(Post 86630)
it might have to do with the stigma surrounding it- like the cavalier I saw yesterday with a vtec decal across the windshied? :gay: I wished my engine was as capable. But then again it's way cheaper.
I have a picture somewhere of a bright yellow camaro with vtec stickers on it that I found in a Dennys parking lot. It is sad but true... its on placed up there as some amazing power thing... when its really not. Sigh ricers... |
Originally Posted by Splitime
(Post 86665)
It is sad but true... its on placed up there as some amazing power thing... when its really not.
Sigh ricers... I know you love hondas and all splttime, but that pretty much sums up why i hate 'em, because of how stupid and moronic most of the people that own them are....not b/c they're bad cars. |
Originally Posted by Splitime
(Post 86665)
vtec isn't really costly... unless you go B/K/H series. The single cams are equivilant to our 1.6L mazda motors....
|
Originally Posted by m2cupcar
(Post 86693)
I'm assuming 2L vtecs are the expensive ones. My 2L Mazda was ~$750. The F8 (the 1.8 version) was $250. I picked up a set of FE rods ($100) and an F2 crank ($25) that will bring that up to 2.2L. That's $375 for a beefy 2.2L dohc. - rob
Its all about picking the components... and for that motor... lots of custom work :p |
its not that Hondas are bad, its that the community is 70% scammers and 25% retards.
|
Originally Posted by Fritch
(Post 86697)
its not that Hondas are bad, its that the community is 70% scammers and 25% retards.
And... boy o boy did we take this thread off topic :p To get back on topic... I have serious traction issues in my civic. One wheel peel hell all day long. |
umm I think the pulling feeling hes talking about is either imagination, or maybe a broken diff arm/bad mount? could that cause what hes talking about?
|
| All times are GMT -4. The time now is 04:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands