turbo compatibility
 

i am currently running a megan downpipe and manifold with a big 16g and sometimes a small 16g.. but what other turbos are compatible with this setup... id like to switch to a different turbo at some point...
similar to this setup i think
http://cgi.ebay.com/ebaymotors/Megan...spagenameZWD1V
thanks

Another 16g.
PM magna he runs that shit.

From smallest to biggest:

13G (1G DSM Auto)
T25 (2G DSM)
14B (1G DSM Manual)
Small 16G
Big T28 (available from forcedperformance.net)
Big 16G
17C (dunno where you can get these with the DSM footprint anymore, they were never that good)
19C (dunno where you can get these with the DSM footprint anymore, they were never that good)
18G (available from forcedperformance.net)
Chinese EVO III "GT" 16G (avoid)
MHI Evo III 16G
20G (available from forcedperformance.net, different compressor housing, external wastegate recommended)
FP Green (forcedperformance.net, same footprint as 20G but flows around 49lb/min instead of 44lb/min, also recommended for use with external gate only)
FP3052 (forcedperformance.net, requires external gate, full GTBB assembly with proprietary turbine housing)
FP Red (forcedperformance.net, same footprint as 20G and Green, recommended for use with external gate only)
FP3065 (forcedperformance.net, same deal as FP3052 but rated at 65lb/min)
FP3075 (forcedperformance.net, same deal as all FP30 turbos but rated at 75lb/min and not ball bearing, compressor is also sometimes called a T04R and 67-trim or T67)

I have no way to verify if the turbos above EVO III 16G will fit but they will all bolt to the manifold.