Turbo help
I am getting ready to throw my turbo on but I was told I need a divider for the manifold. Have you guys ever heard of that? I was under the impression that is what the waste gate is for.
|
no never really heard from a divider manifold... but who knows, well se waht the others say...
|
thanks thats what I thought. I think hes talkin out his ass anyways
|
If your turbo is a twin scroll unit, you will need a divided manifold.
Twin scrolls have will have two oblong holes at the turbine inlet flange (bolts up to exhaust mani) instead of one larger squarish one. |
Originally Posted by gospeed81
(Post 373120)
If your turbo is a twin scroll unit, you will need a divided manifold.
Twin scrolls have will have two oblong holes at the turbine inlet flange (bolts up to exhaust mani) instead of one larger squarish one. |
Originally Posted by 18psi
(Post 373122)
that is the only explanation I can think of....that its a twin scroll.....other than that, wtf is a divider? lol
|
:giggle:
|
Hey man, don't ask the same question in 2 forums... that's bullshit that only clutters up the fourm and makes you look like a lame-ass NOOB.
And since your terminology might be screwed up, most modern downpipes have a small dividing flange where it bolts to the turbine housing that separates the exhaust gas between the turbine flow and the wastegate flow. |
more pics, less posts
|
All times are GMT -4. The time now is 01:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands