What do you think about this Intercooler?
Hi
I'm planning on putting together a turbo kit for my '99 miata and have a question what do you think about this intercooler: http://cgi.ebay.com/ebaymotors/Bar-P...21642305QQrdZ1. I'm planning on using this: -t3/t4 turbo or if I will get a good deal on a gt35r than that is going on instead -greddy type-rs bov -tial 44mm wastegate -that^ intercooler -EMU or MS -3" exhaust -will make a manifold by my self Thanks for your opinons EDIT:Thank's for moving. Didn't know if it fits the DIY if I'm asking for opinions on a intercooler |
do you have a/c?
It's the same intercooler as some of us here are using (myself included) although we've opted for the 12x18x3 version. I'm not sure on a 99 but on a 90-97 it should fit in perfectly if you don't have a/c |
I have A/C and would not want to take it out. (I'm going to do a cardboard version and test fit it LOL).
|
Sorry to threadjack, but does this one look like a good size for an over the rad setup?
http://cgi.ebay.com/ebaymotors/Front...mZ330011892274 |
Thread HiJack:
I have the Starion, and I find after some hard boosting that my A/C doesn't cool as well for awhile. Does anybody else run into this? Or is it time to throw in some more R-12? |
Originally Posted by tylerdurden
(Post 41431)
Sorry to threadjack, but does this one look like a good size for an over the rad setup?
http://cgi.ebay.com/ebaymotors/Front...mZ330011892274 |
Originally Posted by olderguy
(Post 41432)
Thread HiJack:
I have the Starion, and I find after some hard boosting that my A/C doesn't cool as well for awhile. Does anybody else run into this? Or is it time to throw in some more R-12? |
Originally Posted by Dhaark
(Post 41428)
I have A/C and would not want to take it out. (I'm going to do a cardboard version and test fit it LOL).
It's the best way to tell. Typically the only thing thats in the way with teh a/c is the dryer. But once you get up in the mouth youll be able to see what you can fit. I took a bunch of measurements and went online to see what I could find. What I ended up with fit perfectly in the center of the mouth and I had .5" of clearance from the a/c dryer, so I was happy. |
Thank's braineack I'll be taking off the bumper on the 1st of september-previously i'll make the cardboard version and test fit it.
|
cheap but it will work
|
I plan on a slightly smaller version of that same intercooler as Braineak said here:
http://cgi.ebay.com/ebaymotors/28X7X...spagenameZWDVW In fact, that auction is closed because I just bought it... too late suckas, it's mine!!! |
All times are GMT -4. The time now is 02:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands