What should I expect?
With a GT2560R, 2.5" exaust, 550 injectors, cross-over pipe, Link management and running 6 PSI, what kind of HP and tourque numbers should I be getting?
Just generally I mean. Thanks DB |
185whp ish I would imagine. I made 165whp from my JRSC at 6psi with EM. That turbo is most certainly more efficient than that damn M45. You could certainly expect more (220+) with an IC and more boost.
-Michael- |
About 150-165whp I'd guess. Do you have a GT2560R or a GT25R?
|
Its a GT2560R
DB |
get some WI or an IC and 300 hp would be in range but not at 6 psi maybe more like 13-14
|
Working on an Interecooler setup now... other thread!
Once I get that in place I will be running 10 - 15 PSI, probably a bit lower as I am still on the stock clutch. When I get the new clutch then 12 - 15 for sure! DB |
Originally Posted by da Bajan
(Post 51551)
With a GT2560R, 2.5" exaust, 550 injectors, cross-over pipe, Link management and running 6 PSI, what kind of HP and tourque numbers should I be getting?
Just generally I mean. Thanks DB Mark |
I did 175rwhp with a GT2560R, no IC, at 6psi on my 99 with piggyback fm voodoo box.
|
Cool. Then I guess the info I am getting from DLL is either dead wrong or I have a LOT of tuneing to do!
Probably the tune eh? DB |
175whp 165 ft/lb @ 6psi. 240whp 225ft/lb @ 12psi.
|
Nice! Man, I have to get to tuning to get this thing working better... well load of work coming up over the next week, so no tuning till after that.
DB |
Originally Posted by Fritch
(Post 51704)
I did 175rwhp with a GT2560R, no IC, at 6psi on my 99 with piggyback fm voodoo box.
Mark |
All times are GMT -4. The time now is 04:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands