|
where to buy oil supply?
i need to know what im missing for my turbo.
inlet - m10*1.5 outlet - 2 m8 so far i have this is my shopping cart, not sure what i need for the feed side coming from the motor, drain side off the turbo and drain into the pan. http://www.atpturbo.com/mm5/merchant..._Code=ATP-OIL1 http://www.atpturbo.com/mm5/merchant...de=ATP-OIL-005 http://www.atpturbo.com/mm5/merchant...de=ATP-OIL-024 |
I just bought the feed line from begi (tell them whatever length you want). theres also some weird fitting you'll need to thread into the motor (which they have). and I got the return from ARtech (nice silicone hose)
|
I used the FM feed, and a 3/8" silicon hose from NAPA off of a diesel for my drain.
|
what else do i need guys? i need to know, this is jsut about all i need to buy to finish my turbo setup and i cant start installing.
|
|
|
no
the fitting into the pressure sender is bspt. its a weird size. |
Here are a few options for you:
Hose @ $7.80 per foot http://www.bellengineering.net/produ...roducts_id=584 Fitting: 3/8 NPT x 5/8 Hose barb - Qty 2 needed. One for oil pan, one for turbo http://www.bellengineering.net/produ...roducts_id=593 Oil Inlet Fitting would be cheaper to use a straight fitting, then put the 90* on the oil line. http://www.bellengineering.net/produ...roducts_id=474 http://www.bellengineering.net/produ...roducts_id=568 We do have an oil supply line kit for the 96-05 Miatas. It includes the engine block fitting and turbo fitting. If I need to substitute the oil inlet fitting on the turbo, I can. Just let me know. http://www.bellengineering.net/produ...roducts_id=449 We also have the Distribution block kit that is oil and coolant lines and all fittings needed: http://www.bellengineering.net/produ...products_id=75 Just the BSP fitting into the block: http://www.bellengineering.net/produ...products_id=86 It is plated steel, not brass. Brass and aluminum will break. Oil Drain line kits: http://www.bellengineering.net/produ...products_id=82 I can put one together for a rubber line too, just let me know if you are interested. If needed, I can also get the ATP fittings at the same price. Stephanie |
| All times are GMT -4. The time now is 03:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands