Where Can I Find A Adapter Plater For A T3 Turbo For A T25 Manifold?
 

Im looking for one but can't seem to find an adapter plate specific to what I need, Incase I later down the line want to go with a t3 turbo I would like to find an adapter plate so I can still use my t25 begi manifold

You'll be better off finding a turbo that fits your manifold. Even if you find an adaptor plate, you may have problems with your turbo fitting in the engine bay.

thats True.....err I haft to stop thinking so much, Im Just going to use the t25 I currenty have, Im just going to buy the oil and water fittings I need and try to find out the correct length Of stainless steel oil feed line I'll need and for the drain as well.\

Given how different a T25 flange is: http://www.jgstools.com/turbo/tk010p.jpg compare to a T3 flange: http://www.jgstools.com/turbo/tk030p.jpg , I don't see it being feasible/possible.

yea Im just going to kill this idea off, Im going to use the tools I have already in my arsenal .

i have a t2 to t3 adapter here are some pics PM me an offer and its yours +shipping

the first two pics above are of the t2 flange and then the next two are of the t3 portion and then the top view
and here is the side view of the adapter

what about the dp it probably wont be the same either he already nixed the idea dont cofuse him.

hahah true good looking out but yeah using an adapter would not only dramatically change turbo clearance but the downpipe would have to be re-made if you were planning on swapping to a t3 setup later down the line