Piranah

Hey, I'm new to these forums. I just bought a 2001 miata yesterday that came turboed and with an aquamist WI kit. the turbo seems to be pretty big for a 1.8L. All I could see on the compressor housing was "M24 A/R 60" I'm wondering if anyone knows anything about this turbo and what is comparable to. I have a DB 16g in my WRX, and the Miata turbo seems to be bigger

Any thoughts?

robomeme

Hey- did a quick search, it may be off of a twin turbo 300zx.

http://seattle.craigslist.org/sno/pts/338372279.html

It should be a t3 .60/.63 AR. I picked one up cheap from ebay, having it rebuilt at Alamo Turbo.

MiazdaBLUE

that's not syaing much if the turbo int he miata is bigger than the one in your wrx...wrx turbos are not big at all..basically the same size as a 1.6 greddy turbo...aka mittsubishi 15g-tdo4h.

Piranah

It could be a 300zx turbo. But it looks brand spankin new. And because it says "Garrett" on it, my thoughts are that it's new. could be off ebay though. not totally sure.

Piranah

Well, It's not the stock turbo in the WRX, it's a Deadbolt superzilla 16g. and I think the miata one is slightly bigger.

MiazdaBLUE

ohhh, whoops sorry i musta read right over that.

Piranah

I have a friend who thinks that it's a KKK turbo. Any thoughts?

drewbroo

iTrader: (2)

Its not a triple K turbo unless it has triple K written on it. Garret and KKK are 2 different companies.
Does it look like this?

then its either a T2560 T2860 or T3 Super 60, based on your description I will go with T28

Braineack

iTrader: (62)

it looks like a t3 with one of the larger wheels....

take the compressor housing off, (6) 13mm bolts, and measure the inducer.....

Piranah

It looks exactly like the turbo pictured. After looking more closley at the manifold and assuming that most basic turbo manifold are a T3 footprint, I've come to the conclusion that it is a T2860. Still not completely sure. but it works.

drewbroo

iTrader: (2)

2860 is a nice turbo, its a good middle ground between a 25 and T3, and if its a BB its also super fast spooling. (Disco Potato) Begi makes a nice SS manifold for a T28 now too.

Markp

looks like the 2560 FM uses.

Mark

Braineack

iTrader: (62)

if it has a T3 footprint, then it's a t3....

greddymx5

iTrader: (1)

Got a pic???

Piranah

I'll get a pic up in a minute here. I'm still confused.

Braineack

iTrader: (62)

well hurry up!!

Piranah

Here are the pics!

Braineack

iTrader: (62)

looks like a T3 to me....

the blocked wategate port has me a bit confused....

Braineack

iTrader: (62)

can you take an overall shot of the whole turbo and then of the setup?

Markp

T3's don't normally have the wastegate cast into them.

Mark